EcoHitch Hidden Trailer Hitch Receiver # 306-X7250 Weight

Question

Question:

How much does this receiver weigh?

asked by: Earl B

0

Expert Reply:

The EcoHitch part # 306-X7250 that you referenced weighs in at 37 lbs. It has a towing capacity of 5,000 lbs.

expert reply by: Jameson C

0

Answer 1

The EcoHitch part #306-X7250 that you referenced has towing capacities of 5,000 lb and 750 lbs tongue weight. If the weight of your small bass boat and trailer is less than that this would be a great hitch solution for your 2018 Toyota Highlander.…

view full answer...

Answer 2

The etrailer Trailer Hitch #e98844 and the EcoHitch #306-X7250 for your 2016 Toyota Highlander are both class III hitches, but the etrailer hitch has a higher weight capacity, can be used with a weight distribution system and has a matte black…

view full answer...

Answer 3

For your 2018 Toyota Highlander, I recommend the etrailer.com Class III hitch #E98844 which has a nice matte black powder coat that matches the rear trim well. It has a high weight capacity and will work very well for your vehicle. I've attached…

view full answer...

Answer 4

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 5

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

EcoHitch Hidden Trailer Hitch Receiver # 306-X7250 Weight

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching