Replacement Hardware for the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30

Question

Question:

I removed this from a truck and am putting it on a newer F-350 I got but it looks like i have misplaced the box with all of the hardware except for the hitch. Can the hardware be ordered from Torklift or you guys? I need all the nuts/bolts/spacers etc.

asked by: Russ

0

Expert Reply:

You sure can get it here at etrailer.com!

The replacement hardware for the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30 that you referenced is found as part # TLM8003-F1002-30 on our site. The installation instructions have been linked for you to reference as well in case those were in the box.

Please note that this trailer hitch fits Ford F-350 models from 1999 - 2016 (1999 - 2004 fits a Standard or Step Bumper).

expert reply by: Jon G

0

Answer 1

We currently only offer the bolts of the TorkLift SuperHitch Original Trailer Hitch Receiver #TLF1002 as a kit with the washers, nuts, etc. with part #TLM8003-F1002.

view full answer...

Answer 2

TorkLift rates the installation difficulty of the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" #TLF1002-30 you were looking at for your 1999 Ford F-250/350 at a 6 out of 10 due to needing…

view full answer...

Answer 3

No, the TorkLift Custom Frame-Mounted Camper Tie-Down part #TLF3008 is designed for a factory trailer hitch. The version you want for the Torklift SuperHitch Magnum 30K is part #TLR3504 but you will need to make sure your vehicle is listed in the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Replacement Hardware for the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching