Replacement Hub Assembly for 5 Spoke Utility Trailer Hub/Drum with T-25580 and LM67048 Bearings  

What you have on your trailer is called a 5 spoke utility hub, like part #8-174-5UC3. They're pretty common on mobile homes so I'm guessing this is where your axle came from. This is also evidenced by your 8-14.5 tires since they're often…

We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle. However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then…

The Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is the direct replacement hub. We don't have any wheels that are a fit for this utility bolt pattern. My recommendation for you is to…

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

The only inside diameter seals that have a measurement of 2.12 are 5.2k axles. It is rare that those seals that fit 5.2k axles are installed in your 7k axles. However, it is possible. If you do have a 2.12 inch diameter inner seal measurement, you…

You will want to measure your spindle to make sure (see accompanying photo) but the double lip grease seal that fits Dexter axles that are rated for 5,200 lbs - 7,000 lbs is #GS-2125DL. If you look at the photo you will want to use a digital caliper…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

I'd be happy to help you out, John! To replace the brakes on your 5th wheel trailer you need the etrailer Electric Trailer Brakes #AKEBRK-7-SA which come with a self-adjusting feature so once you initially set them up you won't have to adjust…

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…