Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
(145 reviews)
Price: $270.79
In Stock
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Item # HSAB
Our Price: $270.79
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (145)
- Q & A (0)
- Photos
- Used (4)
Brophy Camper Tie-Downs - HSAB
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Universal Fit
- Powder Coated Steel
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Makes it easier to attach your turnbuckles (sold separately)
- Angled bracket provides more clearance between tie-downs and truck fenders than standard tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder-coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Angled Bracket Makes for Easy Hookup
These particular tie-downs are designed with an angled bracket that gives you more clearance between the tie-down anchor points and your truck's fenders. This extra space makes it much easier to attach and tighten your turnbuckles (sold separately) when you're securing your camper.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSAB CR Brophy Heavy-Duty Tie Downs for Slide In Truck Camper - Black Powder Coated Steel - Camper Hold Down - Angled Design - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4 - HSAB
Average Customer Rating: 4.4 out of 5 stars (145 Customer Reviews)
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.by: Steve03/22/2024
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
by: Leo04/03/2024
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
by: Mickey 05/10/2024
Kimberly was friendly, knowledgeable and really helped me pick out the right tie down. Would have no problem ordering from her agai.
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
by: James07/09/2023
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
Jenny N.
7/12/2023
I wanted to ask if you can send a picture of how the tie downs are installed. I want to help to make sure that you can use the tie downs.
by: Ty05/09/2024
Works great with the bike rack. Looks nice, easy installation. I'm glad I bought it. I would recommend.
by: Matthew06/20/2023
Items in the box were not secure and clearly banged around during shipping. Box was torn in a number of places and resulted losing the T-bolts. I discovered Friday evening, and called etrailer the next morning. Person indicated you don't ship on Saturday but would go out Monday morning and she'd mark it priority. She indicated I could expect delivery on Tuesday or Wednesday. I received notice of the delivery on Friday as I was on the way to Canada fishing for a week. Needless to say I got creative and used pieces of 2x2 instead to leverage brackets to truck bed side. When I got home I looked at the T-bolts and think I will stick with the wood. There is no coating on the T-bolts so would likely damage the bed lining.
by: Devin05/24/2023
1) Poor quality product: The nuts for the bed clamp can't even be tightened all the way due to poor design, friction with the body of the clamp.
2) The neoprene pads referenced in the instructions weren't included in my package.
3) Fast shipping time and good communication from eTrailer
Jenny N.
5/26/2023
I know that these tie downs are considered to be more universal. The external bed rail cannot be more than 5.5 inches wide and there needs to be at least 2 inches of space under the lips of the rail. Would you be able to send a picture of how yours is installed? Just be sure that you do not have a double- wall or step side bed. I will have Customer Service reach out to you about the missing neoprene pads. We will have them sent out.
by: Jeremy03/23/2023
The product itself will do the job, after I spend some precious time to clean it up. I was amazed that all the individual parts and hardware made it, since the box was totally destroyed. All of the powder coating of the plates are badly scratched, down to raw metal, just from banging and sliding against each other. A couple corners of the thinner metal flanges are bent, too.
This package looked like it was drop-kicked down a flight of cement stairs in a fit of rage.
Unfortunately, I need this to work ASAP, and will repair and modify to suit my needs. Never mind how I feel, or the principal of the matter, but I feel some refund or discount is in order.
I’m sure it left Brophy’s manufacturing facility looking shiny and straight.
I’m sure they could improve their packaging.
I’m certainly sure that etrailer could indentify this obvious issue and take some steps of their own to maintain a happy clientele, like simply throwing it into another heavy box.
Jenny N.
3/24/2023
It certainly sounds like the tie downs did have a rough ride in shipping. Customer Service will reach out to you.
by: Walt 07/26/2023
Your service was great. The products I ordered arrived ahead of schedule. Also the tie downs look to be of great quality--very heavy, I can't wait to try them this weekend. The shipping box took a real beating. The packaging tape worked well at holding the box together. The only suggestion I have is that you might consider using a stronger cardboard box or reinforcing it somehow to withstand the handling of your products while being shipped.
by: Loretta 08/02/2023
the clamp ons didn't allow for the plastic cover over the truck bed rails to remain in place on the 2022 Nissan Frontier KC with 6' 1" box.
by: Excellent 05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads.
etrailer is a great company to work with as well.
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Bob T.
8/30/2014
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
by: Andrew 05/10/2023
The ease of installation and the robust product makes this a great go to for truck camping.
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
by: Michael11/14/2023
The service was great and the staff was more than willing to help with any issues the only reason I gave it four stars was that the website was misleading
by: Gene03/17/2023
Good quality but to wide off bed doesn’t clear camper jacks
by: Erik 12/05/2023
Everything was correct to my order standard delivery was very fast
by: Les 11/17/2023
Awesome quick shipping. Thanks now I can pick up my camper this weekend
by: Sheila 01/24/2023
If only all companies were as service driven as Etrailer! We have always been pleasantly amazed at how courteous and efficient they are, from taking the initial order to delivery and follow up. Friendly, earnest and fast!
25
145
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Will Brophy Clamp-On Tie-Downs Accommodate A 2,400lb Truck Bed Camper While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs # HSAB there is a 3,000lb capacity for the turnbuckles # TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to meet the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of space beneath lip of bed rail Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
view full answer... - Do Brophy Clamp On Camper Tie-Downs Fit 2021 Ford RangerI believe you are asking about the Brophy Tie-Downs # HSWB, and those won't fit your 2021 Ford Ranger as they are too wide for your truck's bed rails, and wouldn't be tight enough to your truck. I checked with Brophy and they were very clear those specific tie-downs are for the 2019+ F-250 and F-350 and should not be used on other trucks. What you can use instead for your '21 Ford Ranger are other Brophy tie-downs: - Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB The # HSAB are a...
view full answer... - Are Brophy Tie-Downs Compatible with Newer Super Duty Pickups with Aluminum BedYou can use the Brophy Clamp On Camper Tie-Downs # HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs # HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are dimensional photos of each for you to reference with your application. You will notice that one, part # HSAB, has an extra bend towards the end where you attach your tie-downs.
view full answer...
- Lance Truck Bed Camper Tie-Down Recommendation for a 2011 Chevy Silverado 2500Since you're going with occasional use of your Lance camper I recommend the following parts for a tie-down system on your 2011 Chevy Silverado 2500: - Brophy Clamp On Camper Tie-Downs # HSAB - Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP Happy camping!
view full answer... - Will Frame Mounted Camper Tie Downs Work with Wheel to Wheel Running Boards 2014 Chevy SilveradoI do have a set of camper tie downs that will allow you to leave the Ranch Hand Running Boards installed on your 2014 Chevy Silverado 2500 but the TorkLift Custom Frame-Mounted Camper Tie part # TLC2220 will not work with these running boards. Unfortunately, we do not have a way for you to adapt the tie downs to work with your running boards. Instead, I recommend using a set of bed mounted tie downs like the Brophy Stake Pocket Mounted Camper Tie Downs part # TDSF if your truck bed has...
view full answer... - Brophy Clamp On Camper Tie-Downs 2015 Ford F-250 Super DutyYes, the Brophy Clamp On Camper Tie-Downs, # HSAB, will fit your 2015 Ford F-250 Super Duty as long as it is not a dually. Your external bed rail width cannot exceed 5-1/2", requires at least 2" of space beneath lip of bed rail and not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds. You will also need Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4, # TDHP. Please see the link to product review and installation...
view full answer... - Brophy Camper Tie Downs 2015 F-150The Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options, they are mounted onto the bed rails of your truck, no drilling required. For your 2015 Ford F-150 with a pop-up type slide-in type, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP....
view full answer...
- Brophy Camper Tie Downs that Fit 2013 Ram 2500HDThe Brophy Angled Hold-Downs # HSAB, Camper Hold Down # HSSF, and the Camper Hold Down Zinc Finish # HSBP will all fit your 2013 Ram 2500. The Brophy Angled Hold-Downs # HSAB have neoprene pads to protect your truck's paint. They also provide more clearance between the hold-downs and the outside truck fenders. If you need hardware to tie down your camper, I recommend the Camper Tie-Down Hardware Package # TDHP.
view full answer... - Recommended Brophy Camper Tie-Downs for 2005 Toyota Tundra For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other options for a bit of an easier installation and a more secure attachment. Just note that some drilling will be required. We had a customer use these with his 2005 Toyota Tundra and reported that they worked perfectly so we know that they fit the stake...
view full answer... - Which CR Brophy Truck Bed Camper Tie Downs for a 2019 Chevy Silverado 1500As long as you have at least 2 inches of available width between the inside bulkhead of the bed side and the inside of the inner lip on the top of the bed side (see diagram), the # HSAB is a fit according to CR Brophy. To attach the tie downs to the anchor points on the truck bed camper, you'll also need the # TDHP turnbuckle kit. According to CR Brophy, the # TDSF tie downs wouldn't be compatible. If you click the provided links, you an see product description videos for the tie down...
view full answer...
- Recommended Camper Tie-Down Turnbuckles for a 2019 Ford F-350 DuallyThe TorkLift AnchorGuard Turnbuckles part # TLS9013 are designed for bed mounted tie-downs such as the Brophy Clamp On Camper Tie-Downs part # HSAB. If you have bed mounted or bumper mounted tie-down then these will work great for you. However, if you have frame mounted tie-downs like the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2021 for front or part # TLF3008 for rear then you'll need frame mounted turnbuckles like the TorkLift Locking FastGun Turnbuckles for Frame-Mounted...
view full answer... - Camper Tie Downs for a 1999 Ford F-350 DuallyYour 1999 Ford F-350 probably does not have a double-wall but if it did then there wouldn't really be any overhang where the tops of the bed sides roll over towards the center of the truck bed. I have not heard of any fit issues with Brophy camper tie downs # HSAB and Ford trucks in the same generation as yours. But you also have a dually so there could be a fit issue though it hasn't been officially tested on a 1999 Ford F-350. For these tie downs I also recommend the hardware package...
view full answer... - Camper Tie-Down Fit For 2021 Toyota Tundra With Step Under Truck BedI checked with TorkLift, and their tie-downs will not fit your 2021 Toyota Tundra since you have a step underneath your truck bed, but depending on a couple measurements, you will still be able to use the Brophy Clamp On Camper Tie-Downs # HSAB. These will work so long as your bed rails are no wider than 5-1/2 inches and you have at least 2 inches of space beneath your bed rail; they are also not compatible if your Tundra has a drop-in bed liner or a plastic bed rail. The other thing...
view full answer... - Will the Brophy Clamp On Camper Tie-Downs Fit a 2020 Toyota TundraThe Brophy Clamp On Camper Tie-Downs part # HSAB are universal tie-downs used to secure a truck bed camper to a truck bed. They are universal because the manufacturer does not do any testing on specific year, make, and models. That said, we have heard back from customers using these tie-downs on earlier model Toyota Tundras so they should work on the 2020 as well. In order to complete your setup you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Brophy Clamp On Camper Tie-Downs Compatibility With A 1973 Ford F-250 LongbedIf your 1973 Ford F-250 is not a dually and has bedrails that are not more than 5.5" wide and the space between the lip of the bedrail and the wall of the bedrail is at least 2" wide then the Brophy Clamp On Camper Tie-Downs # HSAB will work for your vehicle. These tie-downs will clamp onto the bedrails of your truck to provide you with attachment points for your truck bed camper. You'll also need some turnbuckles # TDHP to properly mount the camper to your tie-downs.
view full answer... - Turn Buckles to Use with Brophy Camper Tie Downs HSABSounds like you are asking about the turnbuckle kit to use with the Brophy Camper Tie Downs part # HSAB that you referenced. For that we have the Brophy Turnbuckles part # TDHP that was designed to be used with the HSAB and would work really great.
view full answer... - Will the Brophy Camper Tie-Downs Fit on a 2008 Nissan FrontierThe Brophy # HSAB are designed to be a universal fit on most trucks; as long as your bed rails aren't wider than 5-1/2" then you'll be able to use these camper tie downs on your 2008 Frontier without any issues. These are a nice solution to save money and with a smaller camper you may find that you don't need better tie-downs.
view full answer... - Will Brophy Clamp On Camper Tie-Downs Work for 9.6 Foot Long Camper on 2000 Ram 1500The Brophy Clamp On Camper Tie-Downs # HSAB referenced in your question is a universal design that will work on most trucks. You will just want to make sure that the external bed rail width on your truck is not greater than 5-1/2 inches and that there is at least 2 inches of space beneath the lip of the bed rail. These will do a great job of supplying heavy duty attachment points for securing your camper to the truck bed. These tie-downs do not have a particular weight capacity or size...
view full answer...
- Will Brophy Camper Tie Down # HSAB Fit 1977 Ford F-250For older trucks like your 1977 Ford F-250 the Brophy camper tie downs part # HSAB will fit and work well. For a hardware kit then you'd need the part # TDHP which secures the camper to the tie downs.
view full answer... - Brophy Clamp On Camper Tie-Downs Replacement T-BoltWe do have a replacement T-bolt available for the Brophy Camper Tie-Downs part # HSAB, part # HSBP, part # HSCP, part # HSSF or part # HSWB. The replacement T-Bolts are part # BR2007 and only come in a pack of four. I have attached an installation video of HSAB for your reference.
view full answer... - Truck Camper Tie-Downs on 2013 Chevrolet SilverardoThe Brophy Camper Tie-Downs # HSAB will not work with your 2013 Chevrolet Silverado's bed liner. If you decide to remove the bed liner they will work if the external bed rail width is less than 5-1/2 inches and there is at least 2 inches of space beneath the lip of the bed rail. You will also need the turnbuckles # TDHP. If you prefer custom tie-downs for the camper I've linked our selection. You'll want to choose your specific bed length, cab, and trim to select the correct part for...
view full answer... - Are the Brophy Clamp On Camper Tie-Downs Available in a Set of 2The Brophy Clamp On Camper Tie-Downs # HSAB are only available as a set of 4 (front and rear) tie-downs.
view full answer... - Recommended Camper Tie-Downs for 2005 Chevy Silverado with Plastic Bed RailsThe Brophy Clamp On Camper Tie-Downs like the Bed Mount # HSAB referenced in your question are not compatible with your 2005 Chevrolet Silverado because of its plastic bed rails. I recommend instead going with bolt-on tie-downs like you mentioned that are designed specifically for your truck. I have attached a link that will take you to our available selection of Torklift Camper Tie-Downs that are designed for the 2005 Chevy Silverado. You will want to use the drop-down menu at the top...
view full answer... - Brophy Camper Tie Downs that Fit 2014 Ram 1500Brophy has tie downs that are a fit for your 2014 Ram 1500 with the part # HSAB and # HSBP but the part # TDSF is not a fit for your vehicle.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Surface Scratches
Notes: Parts are badly scratched throughout, strictly cosmetic.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and paint chips. Otherwise new and unused.
Condition: Installed
Notes: some light scratches and installation marks
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
April
7/11/2014
Haha