Recommended TorkLift Camper Tie-Downs for 2007 Ford F-350 with Factory Hitch

Question

Question:

I have a 2007 Ford F350 Lariat super duty 4Dr with Cab-only running boards and the factory hitch. I am looking for frame mounted camper tie-downs.

asked by: Michael J

0

Expert Reply:

If your 2007 Ford F-350 Super Duty has an 8 foot bed, does not have any board or step underneath the truck bed, and is equipped with the factory hitch, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2011 (for the front) and # TLF3004 (for the rear). These sturdy tie-downs are custom-fit for this truck and provide a clean, unobtrusive look when installed. They will give you attachment points at the front and rear of your truck for securing a bed-mounted camper. The tie-down inserts, frame brackets and necessary hardware are all included.

These tie-downs also come in aluminum with part # TLF2011A for the front and # TLF3001A for the rear.

If your Ford F-350 has a 6-3/4 foot bed, you will instead need part # TLF2007 and # TLF3004. For aluminum, you will use # TLF2007A and # TLF3001A.

I have attached a couple video demonstrations on this product along with the written installation instructions that you can take a look at.

expert reply by: Chris R

0

Answer 1

Yes, for your 2001 Ford F-250 crew cab, long bed, diesel, with removed side steps, and an aftermarket hitch the correct tie downs are the part #TLF2011 and #TLR3500 that you referenced.

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

The valve in your regulator is likely going bad and allowing the gas leak so you would want to replace it. I recommend swapping it out with the JR Products Compact Automatic Changeover 2-Stage Propane Regulator #37207-31525. This has 1/4" FIF…

view full answer...

Answer 4

I attached a wiring diagram that shows how the Atwood water heater switch part #AT91959 gets wired up. Since your water heater is the G6A-8E you'd need to use the middle diagram.

view full answer...

Answer 5

Since the Firestone Air Bag Kit part #F2550 is a confirmed fit for your 2008 Ford F-250, is compatible with in-bed hitches like the B and W #BWGNRK1108 you have installed, and offers the highest quality air bags it's the kit I recommend. For a…

view full answer...

Answer 6

If you do indeed have a factory hitch on your 2006 Ford F-350 Dually long bed, the options available for you for frame-mounted camper tie-downs on your depend on if you have boards or steps installed on your truck. If you do have boards/steps…

view full answer...

Answer 7

You could certainly use Opti-Brite LED work light #TLL48FB on your horse trailer and put it on a switch but having it wired into the running light circuit could have some unintended issues. Specifically, if you forgot to turn the switch off and drove…

view full answer...

Answer 8

Your best choice in a camper tie down will depend on how your F-250 long bed is equipped. On the linked page you can use the drop-down menu at the top of the page to select how your truck is equipped, specifically whether it has a board or step…

view full answer...

Answer 9

If your 2007 Ford F-350 has the 8 foot bed, is equipped with the factory trailer hitch, and doesn't have a board or step beneath the truck bed, the correct TorkLift Rear Tie-Down Kit is part #TLF3004 or #TLF3004A for the aluminum model that will…

view full answer...

Answer 10

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

view full answer...

Recommended TorkLift Camper Tie-Downs for 2007 Ford F-350 with Factory Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching