Is Draw-Tite Class III Hitch 75691 Concealed Behind Rear Bumper When Installed on 2010 Ford F-150

Question

Question:

Will this hitch be hidden behind the bumper on my 2010 Ford F150 crew cab?

asked by: Marc

0

Expert Reply:

When installed on a 2010 Ford F150, the Draw-Tite # 75691 would be partically concealed behind the bumper. The receiver tube is the main portion that'll be visible, along with the lower portion of the hitch crossbar.

The linked installation video will give you a good idea of what the hitch looks like once it's installed.

expert reply by: Jeff D

0

click to enlarge

Answer 1

The majority of this Draw-Tite Max-Frame Trailer Hitch Receiver #75691 will be hidden behind the rear bumper of your 2011 F-150. It will have the same basic appearance that the factory hitch for this vehicle would have. The hitch opening will be…

view full answer...

Answer 2

I do have a way for you to install a 7-way trailer connector on your 2012 Ford F-150 but the plug in the photo you attached does not have all of the circuits needed for a 7-way trailer connector so there is not one that plugs directly into this.…

view full answer...

Answer 3

You'll have to compare the exhaust setup you installed on your 2010 Ford F-150 to the picture I attached to see if your aftermarket exhaust will fit with the Draw Tite #75691. Our hitches like this have only be tested on vehicles that have…

view full answer...

Answer 4

Hey Cynthia, thanks for reaching out! We've got the Draw-Tite Class IV #75506 and the Draw-Tite Class V #41933 that fit your 2006 Ford F-150 STX as long as it doesn't have the factory hitch. I've attached some installation videos of these…

view full answer...

Answer 5

Technically none of the hitches made for the 2022 Ford Escape are designed to fit the PHEV model. However, we do have a review from a customer who successfully installed the etrailer #e89YR on their 2022 PHEV. They did take this to a local installer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable…

view full answer...

Answer 9

Yes, we do have the parts you will need to add all the parts you need on your 2022 Toyota Tundra for towing. First you will need the Curt Trailer Hitch Receiver #C44BR. This is a custom fit receiver with a 2" receiver tube. For the electrical…

view full answer...

Answer 10

There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift #TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also…

view full answer...