2-Wire Pigtail for Peterson Trailer Lights - 2-Prong PL-10 Plug - 19" Lead

Video Transcript for Review of Peterson - Trailer Lights - B142-50

Today we're going to take a look at the two wire pigtail for Peterson Trailer Lights. This is going to be a two pronged PL-10 plug with a 19-inch wire lead. This is going to allow you to quickly and easily get your lights connected to your wiring.As you can see I have one of our Peterson lights here. It's just going to plug right into the back. It's designed to be used for your backup and utility lights. Just has that male pin with a two pronged PL-10 molded plastic plug.

Pops right into the back of your light and then we'll have our two wires coming off there so we can get our light connected.The white wire with that pre-installed #10 ring terminal is going to be our ground and then our black wire will be our power. So I'll hook that up to my power source here so we can check out how our wire functions.And as you see, we'll be able to get power to our light and get everything connected as it should be. Now you have 19 inches of length coming off the back of that plug so you can get all your lights connected and get you out on the road.Again, this is going to be specifically designed for use with the Peterson backup and utility lights. That's going to do it for our look at the two wire pigtail for Peterson Trailer Lights with a two pronged PL-10 plug and a 19-inch wire lead.