2004 Ford F-250 or F-350 Super Duty Base Rails that fit RBW Lil Rocker Fifth Wheel Hitch

Question

Question:

Hi can you tell me if the RBW 15k lil rocker will fit this rail kit from Reese 56005-53 kit.

asked by: Chris

0

Expert Reply:

I am pleased to let you know that the Reese Quick-Install Custom Outboard Installation Kit # RP56005-53 will fit with your RBW 15k Lil' Rocker inside the bed of your 2004 Ford F-250 or F-350 Super Duty. The Lil' Rocker was made to fit industry standard rails.

expert reply by: Timothy G

0

Answer 1

If your RBW fifth wheel trailer hitch uses standard above-bed base rails, you can use any universal or F-250 custom 5th wheel installation kit that has standard above bed rails. I recommend the Reese Custom Base Rails and Outboard Installation Kit…

view full answer...

Answer 2

Yes the Reese fifth wheel rail kit part #RP56005-53 that you referenced does fit with the Andersen Ultimate Fifth Wheel Connection #AM3200 as it provides the rails the Andersen is designed to work with.

view full answer...

Answer 3

If you are looking for a set of taller fifth wheel rails the Reese Outboard rails are taller than the standard rails you have in your truck. For a custom set of these rails for your 2003 Ford Super Duty you'd want the part #RP56005-53 and…

view full answer...

Answer 4

For the outboard style Reese rails that you have the correct bracket kit for your 2000 Ford F-250 would be the part #RP56005.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...