PSI Rating for Aluminum Jaguar Trailer Wheel # LHSJ211G

Question

Question:

I purchased Kenda Karrier 205/75/14 load range D tires for my camper. Will these rims handle the 75 psi recommended by Kenda?

asked by: Lawrene L

0

Expert Reply:

The psi rating for the Aluminum Jaguar Trailer Wheel # LHSJ211G referenced in your question, as with any trailer wheel, is actually determined by the valve stem that is used. A valve stem is included with this aluminum wheel, but it is only rated for up to 65 psi.

Since your Kenda Load Range D tires have a 75 max psi rating, you will just need to swap out the valve stem with a higher rated unit like the Americana # AM20904, which is rated for up to 80 psi.

I have attached a couple short video demonstrations on both this wheel and valve stem that you can check out.

expert reply by: Chris R

0

Answer 1

According to Lionshead, their #274-000011 16 x 6 Jaguar wheel can handle the pressure needed to inflate any tire that can be mounted upon it. The so-called weak link would be the valve stem. With a 110 psi tire such as the #LHWL410 235/85-16 load…

view full answer...

Answer 2

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 3

For the Lion's Head 16 x 7 Aluminum Modular Trailer Wheel #LHJM513 the maximum psi pressure will depend on the specific valve stem installed when your tires are mounted. We have valve stems, all shown on the linked page, that vary in their…

view full answer...

Answer 4

If you would like to use a 14" diameter aluminum trailer wheel with a 215/75-14 load range D tire then you would have to order the tire/wheel separate of one another as we do not currently off them in a combo. For the trailer wheel I…

view full answer...

Answer 5

Your Goodyear Endurance Tire is the ST225/75R15 size that you are looking for. This has a load range of E (2,860 lbs at 80 psi) and a max speed of 87 mph just like what you currently have. For a wheel I recommend the Dexstar Steel Mini Mod Trailer…

view full answer...

Answer 6

The diameter for the valve stem hole on the Aluminum Jaguar Trailer Wheel #274-000011 is 0.625".

view full answer...

Answer 7

To find the correct valve stem for your Lionshead Jaguar wheel you only need to measure the diameter of the hole the valve stem is coming through. It is likely that the Americana Metal, Bolt-In Valve Stem #AM20906 will work for you as it includes a…

view full answer...

Answer 8

For a metal valve stem you can use with your Aluminum Cheetah Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver you need the Americana Metal, Bolt-In Valve Stem #AM20906. This valve stem is rated for up to 200 psi and has a chrome plated…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...