Replacement Hardware for Curt Trailer Hitch 13162 for 2004 BMW X5

Question

Question:

Can you provide a replacement hardware kit for Curt #C13162 fitment is for a 2004 Bmw X5. thx.

asked by: Mike D

0

Expert Reply:

There is replacement hardware available for your Curt hitch # C13162. You need Replacement Hardware Kit for Trailer Hitches # RHK; on the product page simply enter "C13162" under the "Hitch Item Number" box and select "Curt" in the drop-down box next to "Manufacturer" and you'll be set.

expert reply by: Kyle S

0

Answer 1

To get the rivet nut included with the Curt Trailer Hitch Receiver #C13162 for your 2005 BMW X5 to tighten up you will need to push up with the hitch very tightly to while you torque the bolt in the rivet nut to the specs provided in the instruction…

view full answer...

Answer 2

Yes, the installation of the Curt Trailer Hitch, item #C13162, on the 2003 BMW X5 does require some drilling. You will need to drill and enlarge a hole for installation. I have included a link to the installation instructions to the right for you.

view full answer...

Answer 3

You are going to have to find a way to hold the nutsert so that you can remove the bolt and try again. It's a pretty tricky situation getting that bolt setup right but you have to do it just like the install instructions and video show. If you…

view full answer...

Answer 4

I recommend the Draw-Tite Trailer Hitch for the 2006 BMW X5, item #75492, which has a 6,000 pound towing weight capacity and a 600 pound tongue weight capacity. The highest capacity hitch is always the way to go when possible, for safety and…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver part #C13162 is a fit for a 2006 BMW X5 (All Models). It has a hidden cross tube or lack thereof, so you'll only see the receiver tube which makes for the best overall look. If you will be towing, then…

view full answer...

Answer 6

Most likely what you would need is the part #30717. This has a 4-way on one side of the connector that would get plugged into your Explorer and 7-way connector on the other side for connecting to your trailer. This 7-way is a 7-way blade style…

view full answer...

Answer 7

Getting the running lights to work would require attaching the correct wire on the trailer wiring harness you are using to the correct wire on the 2005 BMW X5. It will be very similar to the video I have linked showing a typical installation of…

view full answer...

Answer 8

I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver #75492 on your 2005 BMW X5. This is a Class III hitch receiver with a 2 inch receiver opening. It has a 500-lb Tongue Weight (TW) capacity and a 6,000-lb Gross Towing Weight (GTW)…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Replacement Hardware for Curt Trailer Hitch 13162 for 2004 BMW X5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching