Availability of 3-3/4 Inch Tall Hanger for Trailer Suspension

Question

Question:

I have a 2008 keystone fuzion toy hauler its a triple axle! A few of my hanger are bent an need to be replaced. They are all 3-3/4 tall but having a hard time finding the part! Thanks an have a great day!

asked by: Aaron S

0

Expert Reply:

The only 3-3/4 inch hanger we have available is the etrailer.com Front Hanger # 721584. This front hanger is designed for 2 inch slipper springs and works with 9/16 inch diameter bolts. Also note that this 3-3/4 inch measurement is taken from the top of the hanger to the center of the bolt hole. If you are not measuring your existing hanger in this manner (and instead measuring its overall length), please let me know its bolt hole to top of hanger dimension and I will be happy to make a different recommendation.

I have attached a short video demonstration on this product that you can also check out. I have attached a link that will take you to our available selection of hangers that you can look through if this is not the correct size.

expert reply by: Chris R

0

Answer 1

The hanger spacing for a tandem axle trailer suspension setup can be determined, but you need to take into account the axle spacing needed for the overall diameter of your wheel and tire combination and the springs you will be using. Lets say that…

view full answer...

Answer 2

It is not uncommon for the trailer hangers on a tandem axle trailer to be all the same size or for there to be different sizes that can be 1-1/2 to 2 inches different in height when you compare the center hanger to the front and rear. For example,…

view full answer...

Answer 3

We do offer both double-eye and slipper-type leaf springs for many axle weight ratings. You can see all of these leaf springs on the page I linked for you. In the 8K axle capacity we offer two slipper-type springs. Part #e39SR is a 6-leaf slipper…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 6

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 7

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

view full answer...

Availability of 3-3/4 Inch Tall Hanger for Trailer Suspension

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching