Leaf Springs for 8K-Rated Axle
Question:
Do you have replacement springs?
asked by: Mark
Expert Reply:
We do offer both double-eye and slipper-type leaf springs for many axle weight ratings. You can see all of these leaf springs on the page I linked for you. In the 8K axle capacity we offer two slipper-type springs.
Part # e39SR is a 6-leaf slipper spring that is 29-1/2-inches long. Part # e37SR is a 7-leaf spring that measures 26-5/8-inches. Both are 2-inches wide.
Please note that leaf springs tend to stretch when they are worn so the length of the old spring you remove may measure longer than the correct new one. Also it is always best to replace both springs on an axle to avoid alignment/tracking problems.
Products Referenced in This Question
7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 6 Leaf
- 29-1/2 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts
- Q&A: Torque Specs for 9/16" Trailer Axle U-Bolts
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles - 9/16" Diameter
- Search Results: sp~285275
- Search Results: e67sr
- Search Results: sp~160275
- Search Results: e74sr
- Search Results: sp~230275
- Search Results: sp~232275
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Recommended 8,000 lb Slipper Spring Hanger and Equalizer Kit for 2 Inch Springs
- Search Results: sp~161275
- Q&A: Tandem Axle Hanger Kit for 2 inch Wide Slipper Springs
- Q&A: How to Determine Hanger Spacing on 5,200 lb Tandem Axle Trailer
- Q&A: How to Determine Axle Spacing on a 5,000 lb Tandem Axle Trailer
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Mounting Dimensions for Slipper Leaf Spring e74SR and Tandem Hanger Kit APT6SE
- Shop: Brake Controller
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: Review of etrailer Trailer Leaf Spring Suspension - 6 Leaf Double Eye Spring 7000 lbs Axle - e64SR
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation