Lights Flickering on a 2015 Honda Accord with Curt Wiring Harness Part # C56011

Question

Question:

Hello, I installed 2 different curt C56011 harness on my 2015 accord without led lights. Neither of them would work correctly and my lights would flicker off. When checking the continuity with a multi meter on the brown wire worked. I checked all the grounds and wires and still have issues. the trailer works when hooked up to my sierra 1500 truck.

asked by: Garrett

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness part # C56011 is indeed the correct wiring harness for your 2015 Honda Accord without LED tail lights. The issue you are describing sounds like a ground issue. Please make sure that the ground you are using is a clean bare metal surface without any paint present. This is more than likely the cause of your problem. Before attaching the ground screw, sand the surface down with some 80 grit sandpaper to remove any connection inhibiting material. This should fix your problem but if not please let me know and I would be happy to provide further troubleshooting procedures for you.

expert reply by: Conner L

0

Answer 1

On both the Hidden Hitch 60258 (discontinued) and the Draw-Tite, #24843, the top of the receiver tube will be approximately 1 inch below the bottom of the rear fascia. The bottom of the receiver will then be another 1-3/4 inches below that. Measure…

view full answer...

Answer 2

When you test the 4-Way on the Curt T-Connector Wiring Harness, part #56016, at the rear of your vehicle, it should show now power on all 3 pins with the lights off. If you have the vehicle head lights on, you should have around 12 volts at the brown…

view full answer...

Answer 3

We offer ball mounts that fit 1-1/4 inch hitches that are compatible with 2 inch hitch balls. For example we have the #3593 which fits that hitch size and then for a 2 inch hitch ball we have the #19258.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Lights Flickering on a 2015 Honda Accord with Curt Wiring Harness Part # C56011

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching