Dimensions of Gen-Y Weld-On Receiver Tube # 325-GH-002 Behind Collar

Question

Question:

What is the outside diameter of the square steel tube shank, not the collar but the part I will weld?

asked by: John J

0

Expert Reply:

The outside diameter of the Gen-Y Weld-On Receiver Tube # 325-GH-002 is 2-9/16 inch by 2-9/16 inch behind the collar.

expert reply by: Jameson C

0

click to enlarge

Chuck D.

7/22/2020

Gen Y 325 GH 002 and the Curt E9 difference. Trying to figure out if the 2 1/2” outside Square Dimension of the Gen Y vs the Curt is due to wall thickness or clearance! My question is what the wall thickness of Gen Y and the Curt when checked with dial calipers? Thank You

Reply

Chris R.

7/27/2020

Both the Gen-Y # 325-GH-002 and Curt # E-9 have the same 2" inner dimensions for the receiver, so the variance is just a slight difference in thickness. The Gen-Y is slightly thicker at 7/16".

Reply

John P.

2/25/2020

Thanks

Reply

Chris R.

2/26/2020

No problem. Just let us know if anything else comes up!

Reply

John P.

2/24/2020

Besides the dimensions, 2 1/2 versus 2 9/16, what are the differences between the E-9 and the 325-GH-002? I am going to weld a replacement on my trailer hitch because the pin hole has become elongated. Want to get the strongest one.

Reply

Chris R.

2/25/2020

Other than the tube outer dimensions the only real difference is that the Curt # E-9 is about a 1/2" longer overall. This might help with better bumper clearance so I recommend going this route. I can't really compare strength/capacity because Curt doesn't actually list a weight capacity for its receiver. This is simply because the limiting factor is going to be whatever you're welding it to. The receiver itself can handle whatever weight the existing hitch crosstube and vehicle can support.

Helpful Links

Hitch-Fabrication-Parts/Curt/E-9.html

Reply

Answer 1

I went to our warehouse to pull the Curt combo bar #E-9 to provide some measurements. And yes, the Curt combo bar #E-9 will have an internal dimension of 2-inches x 2-inches and outer dimension of the shank is 2-1/2 inches x 2-1/2 inches. The forged…

view full answer...

Answer 2

You will need to weld to the frame one way or another to have a hitch installed on your box truck. The hitch on the picture you attached is still connected to the frame underneath, it just runs up through that step bumper. If you wanted to attempt to…

view full answer...

Answer 3

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…

view full answer...

Answer 4

The Brophy Hitch Extender, #HE06, comes as pictured. You will need a hitch pin and clip like #PC3 or a hitch pin receiver lock like #e98880 to secure the extender. If you want safety and security you will need a receiver lock on both the extender and…

view full answer...

Answer 5

I have the perfect hitch for your 2022 Tesla Model 3 that will be great for using a bike rack now and leave you with the option to tow down the road. It is the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" item #391TES317. The receiver…

view full answer...

Answer 6

So there are differing opinions even here at etrailer as to what is the best product for a customer so you will see some variances in what we recommend. Some of that is due to well researched info and experience and sometimes it might be less than…

view full answer...

Answer 7

What you have there are the Command 003-20 incandescent tail lights. Although we do not have the incandescent replacement, we do have the LED version which is the #CE86FR. You will want to keep the lights the same way they are now with the brake…

view full answer...

Answer 8

The Dutton-Lainson Hand Winch w/ Automatic Brake #DL15761 has a nut on the crank handle shaft that prevents it from coming off the winch. As you turn the handle in reverse it will look like the handle is moving away from the main body of the winch as…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

So there is an option for a compressor that will let you fill up your tires as well, but the wireless Air Lift WirelessAIR Compressor System for Air Helper Springs #AL74000 doesn't have that capability. There aren't wireless options for a…

view full answer...

Answer 11

Even when the flat bed trailer is empty it still needs to be kept level. When the trailer is level it will have even weight on each of the tires therefore not wearing them more than necessary. As a side note, when you leave your gooseneck trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Dimensions of Gen-Y Weld-On Receiver Tube # 325-GH-002 Behind Collar

Product Page this Question was Asked From

Continue Researching