Trailer Hitch Recommendation for 2002 Ford F-Super Duty with Dual Hitch Openings

Question

Question:

How do I purchase 2×2 1 1/2 reciver

asked by: Lawrence

0

Expert Reply:

For your 2002 Ford F-Series Super Duty we have the Torklift hitch part # TLF1002-30 which is a confirmed fit that has an upper hitch size of 2-1/2 inch by 2-1/2 inch and a lower that is 2 inch.

expert reply by: Jameson C

0

Answer 1

The Bulldog Winch 2" x 2" Receiver Mount Shank for Big Dog Shackle #BDW20181C001 doesn't have it's own weight rating but since it's designed for use with the Bulldog Winch Shackle #BDW20188 we can say that the shank is rated for…

view full answer...

Answer 2

The Receiver Mount Shank for Big Dog Shackle part #BDW20181C001 is currently the only shackle shank we offer. Therefore, if you need a shackle shank with a 2" diameter hole you would need to drill out the 1-3/4" diameter hole that is…

view full answer...

Answer 3

I contacted our representative at Convert-A-Ball and the weight capacity of the ball mount adapter #BA-1 is 10,000 pounds and tongue weight capacity is 2,000 pounds. It bolts right onto your weigh distribution shank such as the Convert-A-Ball #AMAC1.…

view full answer...

Answer 4

The lower ball mount portion of the Curt Adjustable Clevis and Pintle Hook Combo with 2" and 2-5/16" Balls #C45008 does not have to be installed when using the upper ball. It does not provide structure to the setup so you could leave it off…

view full answer...

Answer 5

The Curt Adjustable Clevis and Pintle Hook Combo with 2" and 2-5/16" Balls - 6,000 lbs #C45008 has mounting holes that are 1-1/4 inches on center just like the standard weight distribution system shank. EZ Lift uses the standard…

view full answer...

Answer 6

I believe you are referring to the B&W Tow & Stow, and there is not one with a 2 inch hitch ball rated for more than 7,500 lbs. For an adjustable ball mount rated for at least 10,000 lbs, you have a couple options: - Gen-Y Adjustable 2-Ball…

view full answer...

Answer 7

It looks like you want to add the torsion mounted ball mount to your 2018 Silverado and yet want to be able to keep you Equal-I-zer weight distribution system. The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise -…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...