Trailer Hitch Recommendation for 2007 Dodge Ram to Use with Truss Hitch Extender by Torklift

Question

Question:

I have a 2007 Ram 3500 diesel crew cab. I have my old stacked Truss from my chevy 3500, will one on your receivers work with this. I Also need the camper tie downs for this pick up. thanks Ron

asked by: Ron W

0

Expert Reply:

Sounds like you have a Torklift Truss style hitch extender and you are looking for a hitch that works with it and fits your 2007 Dodge Dodge Ram 3500. For that we have the Torklift hitch part # TLD1101 which is a confirmed fit for your truck and is compatible with the SuperTruss hitch extender from Torklift part # TLE1548.

expert reply by: Jameson C

0

Answer 1

The TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1101 that you referenced has two 2 inch hitch openings stacked on top of each other. It is in the Class V category that includes 2-1/2 inch and high capacity 2 inch hitches. I apologize…

view full answer...

Answer 2

Since none of our extenders are a viable option (either too short or not rated high enough for weight), your best option would be to use a ball mount with a long shank. Part #325-GH-064 is rated for 21,000 lbs, fits a 2-1/2" hitch receiver,…

view full answer...

Answer 3

I have a solution for you but the Torklift superhitch item #TLF1002-30 fits Ford trucks. For your 2012 Dodge Ram 3500 we have a couple of options and it will depend on whether or not your truck has the factory hitch. If your Ram truck does not have…

view full answer...

Answer 4

In regards to the TorkLift Custom Frame-Mounted Camper Tie-Downs, these can be used with either the factory trailer hitch or a TorkLift Trailer Hitch Receiver. That said, the rear tie downs are specific to the hitch so if you have a rear tie down…

view full answer...

Answer 5

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.

view full answer...

Answer 6

It sounds like you have a trailer hitch receiver already installed and need to add a second trailer hitch receiver for a double receiver to allow for the extension and tongue weight of your horse trailer. Because you don't have the factory…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Trailer Hitch Recommendation for 2007 Dodge Ram to Use with Truss Hitch Extender by Torklift

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching