Replacement Vent Lid Recommendation Where Seal for Vent Cover is 13 by 13 inch

Question

Question:

Is there a white one?

asked by: Eliseo

0

Expert Reply:

Can you send me a picture of the vent you have? 13 by 13 is smaller than what we normally carry but I may be able to take a look and come up with a solution.

expert reply by: Jameson C

0

click to enlarge

Eliseo

5/23/2018

Here are the pictures you requested Sorry it took so long to get back to you. Any help would be greatly appreciated.

Reply

Jameson C.

5/23/2018

Thanks for the picture! The replacement lid cover you need is the part # BV0554-03.

Reply

Eliseo

5/24/2018

Is there a white one?

Reply

Jameson C.

5/24/2018

Yes there is. For that you'd need the part # BV0554-01.

Reply

Answer 1

The item you are looking for is know as a continuous hinge vent cover. I suggest either #BV0554-03, that is a replacement cover for a 14-1/4 by 14-1/4 inch vent in smoke. Or, the #BV0554-01, in white. I do suggest that you verify the dimensions of…

view full answer...

Answer 2

Based on your picture, I recommend the VentLine Vent Cover, Item #BV0554-01. It looks to be the same size and has a similar hinge. It is a white domed cover that is easy to install. I have attached a video for you to check out.

view full answer...

Answer 3

I found some photos of the Heng's Roof Vent 122112 online. Based on this, it looks the correct replacement for you should be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part #BV0554-01 for white or part #BV0554-03 for…

view full answer...

Answer 4

It looks like your Sundowner roof vent is a standard 14 x 14-inch size with a continuous-type hinge. For such a vent we offer the Ventline Vent Cover for Old Style Rounded Dome Trailer Roof Vents #BV0554-03 (smoke) and #BV0554-01 (white). We also…

view full answer...

Answer 5

Your Ventline roof vent part number 2394 is the older style Venline roof vent I believe and would require the part #BV0554-01 as a replacement cover. If you happen to have a different roof vent cover style check out the link I attached that shows all…

view full answer...

Answer 6

Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid. Please refer to the linked photo showing the different hinge styles…

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Answer 9

The tires on your trailer should not come off the ground while leveling. It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix…

view full answer...

Answer 10

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 11

There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…

view full answer...

Answer 12

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Replacement Vent Lid Recommendation Where Seal for Vent Cover is 13 by 13 inch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching