Recommended Trailer Hitch Receiver for 2003 Dodge Durango

Question

Question:

Can I use Reese 37069 in a durango 2003

asked by: Jose R

0

Expert Reply:

For your 2003 Dodge Durango, the Reese 37069 is not a fit. You will instead want the Draw-Tite Max-Frame Trailer Hitch Receiver # 75081 which is made by the same company and is a confirmed fit for your vehicle.

If you need trailer wiring, I recommend the Tekonsha T-One # 118334 if you don't have the factory tow package or # 118381 if you have the factory tow package. You will also want mounting bracket # 18144 and # C57202.

For a ball mount, I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, a 2 inch ball and a storage bag. You will also need a product like part # PC3, part # e98880, or part # 63232 to secure the accessory in your 2" trailer hitch receiver.

expert reply by: Jason S

0

Answer 1

Based on my research the standard towing capacity of a 2001 Dodge Durango 4x4 is 4,450 pounds and the maximum is 7,350 pounds. It depends on how it is equipped. The source that you need to check is the owners manual. I do not have access to one…

view full answer...

Answer 2

I can indeed; the correct replacement for your 8-207 Dexter hub and drum is the following: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #84546UC3

view full answer...

Answer 3

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 4

If the drum is in good condition and it has a smooth and clean armature surface (see photo), then you may not have to replace the drum. Most hub manufacturers make their hub/drums to be compatible with electric and hydraulic drum brakes to cut back…

view full answer...

Answer 5

There are exceptions to some rules, generally speaking 13 inch trailer wheels will not work with 10 inch hub and drums. Your wheels might be manufactured differently than most and there isn't a clearance issue like on most. I would imagine the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Recommended Trailer Hitch Receiver for 2003 Dodge Durango

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching