Trailer Coupler Recommendation for 2-1/2 inch Wide Channel and 2 inch Ball

Question

Question:

I am looking for a 2in coupler for 2 1/2 in channel or tongue, with mounting holes 2 1/4 in spacing. Any Chance?

asked by: Don D

0

Expert Reply:

We have couplers that will fit your trailer but none that have mounting holes that match up to the 2-1/4 inch spacing you have so probably your best option would be to go with the etrailer.com Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs # CT-3002-Z. The Mounting holes are 3 inches apart so you will need to drill at least two holes.

expert reply by: Jameson C

0

Answer 1

I recommend the Taskmaster 5.30R12 Radial Trailer Tire #TT53012C. It's radial construction is best suited for highway travel. The Dexstar Steel Spoke Trailer Wheel #AM20132 can also be purchased with a 3rd tire to give you a spare wheel and tire…

view full answer...

Answer 2

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 3

When selecting a ball mount and 2-inch hitch ball for towing your pop-up camper you will want to choose a ball mount that allows the hitched trailer to remain level. The article I linked for you shows how to choose the right 2-inch ball mount with…

view full answer...

Answer 4

For hitch balls for use with the Curt Channel Style Adjustable Ballmount #C45901 that you referenced you'd want to go with shank diameter of 1 inch and a length of at least 2-1/8 inch. For a 2 inch ball we have the part #63845 or for a 2-5/16…

view full answer...

Answer 5

An 11 inch long ball mount is on the longer side but not long enough that it would it diminish the towing capacity of your Toyota Highlander. If were to go much beyond 11 inches I would begin to worry that maybe the leverage would be too much but for…

view full answer...

Answer 6

Rather than change the coupler, the easiest option is to change the size of the ball ON YOUR BALL mount. If your coupler currently uses a 1-7/8 inch ball and your towing vehicle has a hitch and ball mount with a 2 inch ball, you can use an…

view full answer...

Answer 7

Your best option for a coupler that takes a 2 inch ball and that fits a 2-1/2 inch wide tongue is going to be Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs #CT-3002-Z. The hole spacing is not 2-1/2 inches…

view full answer...

Answer 8

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...