Hole Distance Dimensions of Cargo Trailer Strap Hinge Part # 2212

Question

Question:

Do you have a drawing of the above part. Specifically I need to know the distance to the first hole from the barrel on the hinge to the first hole on the 2 strap as measured from the 2 stap side of the barrel Thank you

asked by: Levi H

0

Expert Reply:

I was not clear on the actual dimensions you were needing, so I have provided a photo showing the hole dimensions.

The distance from the hinge pin itself to the first hole on the strap is exactly 3 inches to the center of the hole. The distance between the two holes on the portion of the hinge that would install on the door jamb is 3-1/4 inches, center-to-center. These holes are 3/4 of an inch away from the hinge pin.

expert reply by: Mike L

0

click to enlarge

Answer 1

The T-Strap Hinge for Side and Rear Trailer Doors - 8" Long - Steel #PLR3408 will not be ideal for a 90 degree corner as you can see the purposeful bend at the hinge on the strap end of the hinge that would limit this. A better option for that…

view full answer...

Answer 2

After doing some research on Horton trailers, it looks like most of their enclosed trailers use cam-door style lock like part #383200. If you just need a replacement handle, I recommend using part #158-100. This handle measures 12-5/8 inches long and…

view full answer...

Answer 3

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…

view full answer...

Answer 4

We currently offer 3 different replacement strap hinges, #2008-8, #2512, and #2212, for cargo trailers. I have included a photo showing each of these with their measurements listed. I recommend comparing these measurements to the strap hinges on your…

view full answer...

Answer 5

From the door mounting hole for the Square Corner Hinge with Reverse Bracket #PLR2216-SSP to the first mounting hole for the door measures about 2" as you can see in the attached photo. If you were referencing a different measurement please let…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Thanks for reaching out! It looks like we did carry that exact wheel at one point on our site but it has since been removed. I reached out to our team about it and they said our rep told us it was NLA'd (no longer available) back in May of 2021.…

view full answer...

Answer 8

The Americana Modular Wheel #AM22461 shares the same dimensions as your SRW 31767A0 trailer wheel. It has the same 17.5" x 6.75" size with 8 on 6.5" bolt pattern and -0.5" offset. It also has the same 6,005lbs capacity with…

view full answer...

Answer 9

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 10

Thanks for the pictures of your horse trailer's rear door. The part #2212 will work as a replacement for the hinges that you have. We have spring latches too like the part #SL716SS as well but do not have door seals.

view full answer...

Answer 11

Yes, a 235/85 R16 tire is designed to fit a trailer wheel with a 6" or 6-1/2" wide wheel. For a premium 235/85 R16 tire option, I recommend using the Westlake ST235/85R16 Radial Trailer Tire part #LHWL410 as all Westlake brand tires come…

view full answer...

Answer 12

The part of the Buyers Products Door Check and Hold Back #337BM2395AA11 with the spring needs to be mounted to your door frame (at the top) while the arm without the spring needs to be mounted to your door. I have attached a photo showing the…

view full answer...

Hole Distance Dimensions of Cargo Trailer Strap Hinge Part # 2212

Product Page this Question was Asked From

Continue Researching