Parts Needed for Towing a R-Pod M-178

Question

Question:

2016 Toyota 4-Runner 4x4 1 I have a reese trailer brake controller, do you have a wiring harness connector adapter which goes from controller to under dash plug-in for this vehicle. The 4-runner already has the oem 6 pin and 4 pin plug ins on the rear. 2 which transmission cooler for this 4-runner all cooler models so to compare, i dont want the entry level model. 3 I have a weight distribution hitch, but need the chain hanger brackets for R-Pod tongue, do you carry these. 4 towing capabilities ? 2016 4-runner 4x4 towing a 2016 R-Pod M-178 , do you see problems of this, other than adding a trans cooler? Thank You

asked by: Tom H

0

Expert Reply:

In regards to transmission coolers, the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets # D13502 is a confirmed fit for your 2016 Toyota 4Runner. Provided that you have a 4.0L V6 Engine 246 C.I 4WD this cooler is not an entry level device.

I have also attached a link to the chain hangers that we have for weight distribution systems. If you can let me know what weight distribution system you have I can make a specific recommendation on chain hangers.

In regards to the towing capacities, check with your owners manual to confirm but most 2016 Toyota 4Runners have a towing capacity of 5000lbs. It looks like your 2016 R-Pod M-178 has a dry weight of around 2500 pounds, please confirm with your owners manual. If you weigh your trailer manually, it is best to weigh it while its fully loaded, like you're about to travel. If you choose to use a scale to determine tongue weight, I recommend the etrailer scale # e99044.

Do you have the exact model of your Reese brake controller? I need that in order for me to find the correct wiring harness that is a confirmed fit for both your brake controller and your 2016 Toyota 4-Runner. If so can you provide me with that information?

expert reply by: Timothy G

0

Answer 1

Trailer hitches are not designed as custom fits for any RV like your 2017 R-Pod, but we can narrow down your choices. In order to choose which hitch is correct, you need to measure the frame of your trailer, which is going to let you know the exact…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...