Does Curt Q20 Fifth Wheel Hitch Fit Same Rails as Curt Q20

Question

Question:

Will the Kurt Q20 hitch fit same rails as Valley 7040

asked by: Rick

1

Helpful Expert Reply:

Yes, the Curt Q20 hitch part # C16130 will fit the same industry standard fifth wheel rails that a Valley 7040 fifth wheel hitch will fit.

expert reply by: Jameson C

1

Answer 1

You'll need spacers, but you can use the Firestone air bags on your 2016 Chevy Silverado 2500 with a 6 inch lift. What you need is the following: - Firestone Ride-Rite Air Helper Springs #F2613 - Air Lift Universal Air Spring Spacers - 6"…

view full answer...

Answer 2

You can use your Curt A20 5th Wheel Trailer Hitch w/ R20 Slider #C16541 in the puck system of your Ford truck; the only thing that you'll need is the Reese Elite Series Underbed Rail Adapter #RP30156. This adapter will mount directly in the pucks…

view full answer...

Answer 3

The rails you have installed in the bed of your 2009 GMC Sierra are the industry standard style rails since you said they are 22 inches apart. That means that the Curt hitch part #C16130 is a confirmed fit and would work well.

view full answer...

Answer 4

To mount your Curt A20 5th Wheel Trailer Hitch w/ R20 Slider #C16541 into the bed of your 2022 Chevrolet Silverado 2500 you will need choose the correct rails based on if your truck has the in bed factory hitch prep/puck system. If you are unsure you…

view full answer...

Answer 5

Since both the Mor/Ryde pin box and the Curt Q20 5th wheel trailer hitch #C16130 are cushioned the two could work against each other and create a rougher ride. Going with the cushioned pin box or a cushioned hitch by itself will help to reduce…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

Hey Clint, you are going to be installing the rail kit on the truck as well, correct? The Demco Recon 5th Wheel Trailer Hitch #DM47YV by itself should take only about 30 mins to assemble and install. The Installation Rail Kit #DM8551000 will also…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...