How Far Out Do CARR Side Hoop Steps Sit on 2010 GMC Sierra

Question

Question:

Hello I have a 2010 gmc crew cab With old full lengthy boards How far out from the rocker will the Carr single steps come out?

asked by: Mark

0

Expert Reply:

If you were to install the CARR steps # CARR103991-1 on your 2010 GMC Sierra they would stick out 8-5/8 inches from where they are installed.

expert reply by: Jameson C

0

Answer 1

The distance between the mounting brackets of the CARR Side Steps #CARR103991-1 that you referenced is 8-1/2 inches on center.

view full answer...

Answer 2

The distance between the two mounting holes on the mounting bracket for the part #CARR103991-1 is 1.9 inches.

view full answer...

Answer 3

I reached out to Carr and found that the plate that you step on on the #CARR103991-1 is 1/4" thick.

view full answer...

Answer 4

The Carr Custom-Fit Side Step #CARR103991-1 referenced in your question does include all the necessary hardware for installing the step on your truck. The step platform is 7 inches long and 3-1/2 inches wide. This will come with 1 step and a limited…

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

The Erickson Retractable Tow Strap #EM77JR has a safe working load rating of 4,500lbs. This is the maximum weight for the vehicle or equipment you are towing. The 9,000lb rating is the break strength. This is the weight capacity the strap will break…

view full answer...

Answer 7

Dexter 8-249 hubs normally have inner bearings like Item #L68149 and outer bearings like Item #L44649. If these are your bearings (the size will be stamped on them) then it sounds like you need Trailer Hub and Drum Assembly Item #84556UC3 by Dexter…

view full answer...

Answer 8

For a keyless door latch we have the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option #295-000183 which installs on the left side of the door (when looking at it from the outside) but the cutout requirement is much…

view full answer...

Answer 9

Basically you need to remove a panel on the dash of your 2018 Lincoln Navigator and the connector is there for you to attach to. See attached picture.

view full answer...

Answer 10

There should be enough free play in the shackles to allow them to move. There is no specific torque rating for shackle bolts. The first thing you should make sure of is that the bolts you use are long enough so that when installed you will have at…

view full answer...

Answer 11

Carr Step part #CARR103991-1 is a single black aluminum step, but you are correct that this same product is also offered as a set of two steps as part #CARR103991. If you purchase the 2-step kit the cost per step drops so there is a price benefit to…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...