Distance Between Mounting Brackets of Carr Custom-Fit Side Step # CARR103991-1

Question

Question:

How far apart are the the brackets for mounting. I am trying to find a side step for a golf cart Evolution Forrester.

asked by: John M

1

Helpful Expert Reply:

The distance between the mounting brackets of the CARR Side Steps # CARR103991-1 that you referenced is 8-1/2 inches on center.

expert reply by: Jameson C

1

Mounting Bracket Dimensions
(click to enlarge)

Answer 1

The distance between the two mounting holes on the mounting bracket for the part #CARR103991-1 is 1.9 inches.

view full answer...

Answer 2

If you were to install the CARR steps #CARR103991-1 on your 2010 GMC Sierra they would stick out 8-5/8 inches from where they are installed.

view full answer...

Answer 3

I reached out to Carr and found that the plate that you step on on the #CARR103991-1 is 1/4" thick.

view full answer...

Answer 4

The Carr Custom-Fit Side Step #CARR103991-1 referenced in your question does include all the necessary hardware for installing the step on your truck. The step platform is 7 inches long and 3-1/2 inches wide. This will come with 1 step and a…

view full answer...

Answer 5

There are a couple of different models of TruXedo soft roll-up tonneau covers that fit your 2007 Dodge Ram 1500 short bed. All of them are shown on the linked page. If your cover happens to mount on top of the bed rails (rather than inside them) as…

view full answer...

Answer 6

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…

view full answer...

Answer 11

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the Trifecta 2.0…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Distance Between Mounting Brackets of Carr Custom-Fit Side Step # CARR103991-1

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching