Is Mounting Hardware Included with Carr Custom-Fit Side Step # CARR103991-1

Question

Question:

Is the mounting hardware included or does that need to be purchased separate?

asked by: Rick

0

Expert Reply:

The Carr Custom-Fit Side Step # CARR103991-1 referenced in your question does include all the necessary hardware for installing the step on your truck.

The step platform is 7 inches long and 3-1/2 inches wide. This will come with 1 step and a limited lifetime warranty. I have attached the written installation instructions that you can also take a look at.

expert reply by: Chris R

0

Answer 1

The distance between the mounting brackets of the CARR Side Steps #CARR103991-1 that you referenced is 8-1/2 inches on center.

view full answer...

Answer 2

If you were to install the CARR steps #CARR103991-1 on your 2010 GMC Sierra they would stick out 8-5/8 inches from where they are installed.

view full answer...

Answer 3

The distance between the two mounting holes on the mounting bracket for the part #CARR103991-1 is 1.9 inches.

view full answer...

Answer 4

I reached out to Carr and found that the plate that you step on on the #CARR103991-1 is 1/4" thick.

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

The Erickson Retractable Tow Strap #EM77JR has a safe working load rating of 4,500lbs. This is the maximum weight for the vehicle or equipment you are towing. The 9,000lb rating is the break strength. This is the weight capacity the strap will break…

view full answer...

Answer 7

Dexter 8-249 hubs normally have inner bearings like Item #L68149 and outer bearings like Item #L44649. If these are your bearings (the size will be stamped on them) then it sounds like you need Trailer Hub and Drum Assembly Item #84556UC3 by Dexter…

view full answer...

Answer 8

For a keyless door latch we have the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option #295-000183 which installs on the left side of the door (when looking at it from the outside) but the cutout requirement is much…

view full answer...

Answer 9

I called my contact at Carr and asked about your 2000 Dodge Ram Van 1500. They told me that they do not have specific steps designed for your van but part #CARR103991 may work for you. These are black powder-coated aluminum. The steps platform…

view full answer...

Answer 10

There should be enough free play in the shackles to allow them to move. There is no specific torque rating for shackle bolts. The first thing you should make sure of is that the bolts you use are long enough so that when installed you will have at…

view full answer...

Answer 11

The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3034-P is compatible with the Tekonsha Prodigy P3 Trailer Brake Controller #90195 and the 2018 Ford E-series Cutaway which is what your motorhome would have been built on. This is…

view full answer...

Is Mounting Hardware Included with Carr Custom-Fit Side Step # CARR103991-1

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching