Length of Bulldog BX1 Square Gooseneck Coupler

Question

Question:

how long is it end to end?

asked by: Ben S

0

Expert Reply:

The Bulldog BX1 Gooseneck Coupler - Adjustable Height # BD1289200300 has a 22" retracted height and 24-9/16" extended height.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Hey Robert, we only carry the Bulldog BX1 with the part #BD1289200300 which includes the outer tube bracket. Bulldog does not offer just the inner tube.

view full answer...

Answer 2

It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub #AKIHUB-545-35-G-K for standard spindles or…

view full answer...

Answer 3

The support capacity is how much a jack can hold whereas the lift capacity is how much a jack can lift. The Bulldog Square Jack w/ Footplate part #BD190754 has a 8,000 lb support and 5,000 lb lift capacity. If you will be using the jacks to lift and…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

The height (as if the hub was resting on a table top) is 4-1/16 inches for the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles #DX22XR.

view full answer...

Answer 6

Sounds like you are asking for basically the overall height of the trailer hub part #AH15450ECOMP which is 4 inches like you can see in the attached diagram.

view full answer...

Answer 7

The Bulldog BX1 Gooseneck Coupler - Adjustable Height - Square - 3" Ball - 40,000 lbs #BD1289200300 you were looking at weighs in at 60lbs. I included a video of the #BD1289200300 for you to take a look at.

view full answer...