How to Wire Optronics LED Stop/Tail/Turn/Back-Up Light STL264RB For Tail and Stop Lights Only
Question:
I would like to put one of these lights at the top of my utility trailer for rear marker and stop light functions only. Will the lights circuit and wiring allow me to do this? Thanks.
asked by: Bob
Expert Reply:
The Optronics LED Thinline Stop/Tail/Turn/Back-Up Light # STL264RB is a high-efficiency LED-type multi-function trailer light that you can install for the specific functions you want.
The light has 4 pigtail lead wires: white is ground; red is brake light; black is tail light; and yellow is turn signal light.
Since you need only the brake and running light functions in your application you will use the white ground wire, of course, and the red and black wires. You will also need Vehicle to Vehicle Tail Light Converter # 118158 to separate out the combined stop/turn signals in your standard trailer wiring. This converter will separate out the stop light signal from the turn light signal so that you have only brake and tail light signals. The red output wire from the converter will connect to the red wire on the light. The (usually brown) trailer tail light wire will bypass this converter and connect directly to the black wire on the light.
Products Referenced in This Question
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Product Page this Question was Asked From
Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide - Submersible - Red/Clear Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail/Backup
- Strip Light
- Surface Mount
- Submersible Lights
- LED Light
- 20-1/2L x 1W Inch
- Red and White
- Optronics
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide Wire to 4-Way Wiring
- Shop: Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide - Submersible - Red/Clear Lens
- Search Results: 66561
- Q&A: How To Wire Up the Trailer Wiring 7-Way Upgrade Kit
- Search Results: weight distribution sway control
- Q&A: Wiring LED Tail Lights with Four Wires
- Q&A: Installing Fusion LED Combo Tail Light Bar # STL264RB on RV with Separate Wiring System
- Search Results: rear axle suspension enhancement
- Search Results: led taillights
- Shop: Optronics Streamline LED Trailer Tail Light - Submersible - 3 Function - 11 Diodes - Red Lens
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Vehicle to Vehicle Tail Light Converter
- Article: Determining Trailer Tongue Weight
- Search Results: reese weight distribution hitch
- Search Results: leaf spring enhancement system
- Shop: Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 15,000 lbs GTW, 1,500 lbs TW
- Article: How to Choose the Right Trailer Hitch Class
- Video: Putco Mud Skins Front or Rear Mud Flaps Review
- Search Results: x chock
- Q&A: Upgrading 4-Way of Trailer to 7-Way to Wire Battery for Powering Trailer Interior/Exterior Lights
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Video: Optronics Fusion LED Combination Tail Light Bar Installation
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Lights
