Recommended Sumo Springs for 2018 Ford F53 Chassis 24,000 lbs

Question

Question:

I am looking at a set of Sumo Springs for the front axle of my 2018 F53 with a 24K chassis. I need to know the difference between the Maxim and the Rebel model. How does the 2 piece work if the load is not great enough to have the 2 pieces mate up?

asked by: Sean F

0

Expert Reply:

The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle # SSF-173-40-2 will support the load and compress together on your motorhome all the time when there is weight. The split design is a benefit for the individual springs when the suspension travel is greater than what a single non-split design could handle. In other words, when one wheel travels lower on a turn, the spring will not take weight off the wheel so it has more weight in contact with the road for better traction.

The SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-187-54-1 do not have the split design because they are for the rear, non-turning axle. This will both compress and restrict movement to assist with body roll as well as load bearing.

Based on your chassis weight these are the two recommended spring sets for your vehicle.

expert reply by: Jason S

0

Dave K.

8/8/2020

I have a 1990 Holiday. Rambler 31 ft class A with Ford chassis, what system would work best? Lots of body roll ,makes it difficult in windy conditions .

Reply

Jon G.

8/18/2020

You're going to want the SumoSprings # SSF-172-40-2 for the front and then the SumoSprings # SSR-185-40-1 if your GVWR is 16K - 18K or # SSR-181-54-1 if your GVWR is 20K - 22K for the rear. I also recommend investing in anti-sway bars and a steering stabilizer to help with the movement. I attached a link to our selection that you can filter through in regards to your GVWR.

Helpful Links

swaybars-1990_ford_f-53.htm

Reply

Jeffrey O.

7/18/2020

what are the part numbers for sumo springs front and rear. 2016 ford f53 thor 29.4 motor home? GVWR 18,000lbs. Does e-trailers have them?

Reply

Chris R.

7/22/2020

Yes, for the rear axle you will use part # SSR-187-40-1 and for the front axle part # SSF-170-40-2.

Reply

Gary B.

4/23/2022

I HAVE A 1995 FLEETWOOD BOUNDER 34J I WANT TO KNOW WHAT SUMO SPRINGS TO BUY FOR THE FRONT ITS GOT THE 460 F53 CHASSY THANKU

Reply

David B.

4/23/2022

Hey Gary, there isn't a sumo spring for the front end but I found this for you. Timbren Front Suspension Enhancement System # TFFF53MH. If you want a sumo for the back though check out this bad boy right here, # SSR-181-54-1

Reply

Answer 1

From what I could find it looks like your 2018 Thor Challenger 37TB is on an F-53 chassis. If this is the case then you would want part #SSF-173-40-2 for front SumoSprings and part #SSR-183-54-1 for rear SumoSprings. These are rated for a GVWR…

view full answer...

Answer 2

The Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar #RM-4139-127 will be the best first step in assisting in control since the rear already has assistance. The second step would be to add a Steering…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

From our experiences the Harbor Freight trailers like yours have a hub bore that requires a cap or Bearing Buddy that measures 2.047 inches like the #BB2047 you referenced. We don't have a standard cap that fits this size so the Bearing Buddy is…

view full answer...

Answer 5

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 6

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 11

A typical tire inflator will have a CFM rating of around 1.5 to 2 CFM, with a majority of the little cheap ones being less than 1 CFM. The higher the rating the faster you'll be able to air up the tires. The Viair Automatic Portable Air…

view full answer...

Answer 12

Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but after…

view full answer...