Do the Trailer Hubs Come Pre-Greased
Question:
Does this assembly come greased?
asked by: Jason
Expert Reply:
No, because the hub would need to be assembled and then disassembled for installation and the grease could attract dirt and grime during shipping, our hub and drum assemblies do not come pre-greased.
You will need to grease the bearings prior to installation. I would recommend using the Deluxe Bearing Packer, item # L70025, along with the Grease Gun for 3 inch cartridges # 30-800 and the Marine Trailer Wheel Bearing Grease Cartridges, item # L54FR. Marine grease is hydrophobic and will not break down from water entering the hub due to condensation or immersion in water.
Products Referenced in This Question
LubriMatic Mini Grease Gun with Straight Pipe - 12" Hose
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 4500 psi
- 3 oz
- LubriMatic
more information >
LubriMatic Professional Pistol Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 7000 psi
- 14 oz
- LubriMatic
more information >
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: l44649
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: bearing buddy
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Video: etrailer Trailer Idler Hub Assembly Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: l68149
- Search Results: 10~36
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Suspension Enhancement
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer