Sizing and Compatibility of the Curt 2 Bike Platform Rack

Question

Question:

I would like to purchase a Curt 2 Bike Platform Rack 2inch Hitch. Where do I choose the 2inch size? It says it comes in Curt 2 Bike 1-1/4inch and 2. Thank you.

asked by: Ed

0

Expert Reply:

The Curt 2 Bike Platform Rack, part # C18085 actually fits both hitch sizes out of the box. It includes a removable adapter sleeve that lets it move between the 1-1/4 inch and 2 inch size.

expert reply by: Jacob W

0

Answer 1

The Curt 2 Bike Platform Rack, #C18085, will carry a bike that the wheel measure 68 inches from center to center. If your bike has a 66 inch center to center measurement, then this rack will work with your application.

view full answer...

Answer 2

For the item you have selected, there would not be a problem with having bikes with the same height frame. The hooks that grab the frames are offset by 3 to 3-1/2 inches so that each hook can be securely positioned on both frames. If I can be of…

view full answer...

Answer 3

The 29" tires on your bike are a standard size so they will be compatible with the Curt 2-Bike Platform Rack #C18085 along with pretty much any other rack that we carry. This rack is compatible with a max wheelbase of 68" so if your bike…

view full answer...

Answer 4

Thanks for reaching out! For your application I recommend checking out the Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR. This is a platform style rack that secures bikes by the wheel and can accommodate up to 60 lbs bikes with a standard 3"…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Sizing and Compatibility of the Curt 2 Bike Platform Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching