Comparing the Redarc Tow-Pro Elite vs Tekonsha Prodigy P3 Brake Controller

Question

Question:

How does the Redarc compare to the P3 in performance and reliability? Towing a 3 axle 20,000lbs trailer... I have looked for reviews and posted questions to several RV groups on Facebook and Im not finding anyone with experience with the Redarc controller. I like the concept, but I want to know that I am buying a product that is as good as or better than Tekonsha P3 in performance and reliability. Will be installed on an 08 Dodge 3500. I will try to attach a picture of my rig. Thanks for any feedback.

asked by: David M

0

Expert Reply:

The RedArc Tow-Pro Elite # RED44FR is comparable in reliability and performance to the Tekonsha Prodigy P3 # 90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the greatest aspects of the Tow-Pro Elite is the size and mounting location. Both have very usable features and use different methods of communication for diagnostics and modes. Both have the manual override options and are top of the line controllers.

The RedArc Tow-Pro Elite is my personal favorite because I like the clean look and LEDs. If I were wanting to have constant visible diagnostics, then my opinion would sway the opposite way. You can't go bad with either controller. I've attached videos to assist.

The installation of the P3 is slightly easier with a harness, where the Tow-Pro requires you get a similar harness and splice it. For either application you will want the # 3020-P for your wiring harness to connect to your factory harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Redarc Tow-Pro Liberty #RED24FR would be a great choice for your 2022 Jeep Cherokee Trailhawk. There are other options but this brake controller is my personal favorite. It is reliable and stays out of your way with only the knob showing in the…

view full answer...

Answer 2

I have not heard of such a thing. What your friend may be talking about is an Electric Over Hydraulic Brake Actuator that allows you to use an electric brake controller on a trailer with hydraulic brakes. This will not work for a trailer with…

view full answer...

Answer 3

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 4

Trailer brake controllers such as the Prodigy P3 #90195 will generate an electrical brake signal for the trailer brakes either when you press the manual override lever or when the controller receives a signal from the vehicle's brake light switch…

view full answer...

Answer 5

You can reset the controller by unplugging it for 15 minutes. However that should not be needed if you just need to adjust the output power. Just use the buttons on the left of the controller to select the output voltage you want. I have included a…

view full answer...

Answer 6

The Redarc Tow-Pro Elite #RED44FR functions the same as the P3 #90195 though the operations are a little different. There is a manual override which is what that lever is on the bottom of the P3. The Tow-Pro Elite manual override works by pressing in…

view full answer...

Answer 7

To install the Tekonsha Prodigy P3 #90195 in your 2016 Toyota Tacoma, you'll need the #3031-P Brake Controller Wiring Adapter Harness. The connector you're looking for is located behind the kick panel where it meets the firewall as shown in…

view full answer...

Answer 8

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

view full answer...

Answer 9

The Redarc Tow Pro Liberty part #RED24FR is a fit for your 2010 Toyota Tundra and would work great in your 2010 Toyota Tundra. You'd just need two install harnesses part #3040-P and #331-TPH-017 then you'd be set.

view full answer...

Answer 10

Yes, we do have a hitch and wiring harness available for the 2023 Kia Telluride. The etrailer Hitch item #e45ZR is confirmed to fit the 2023 model. It is custom fit and bolts directly to your Telluride with included hardware. This is a class III…

view full answer...

Answer 11

For your R-Pod 193 the storage cover I recommend for you is the Classic Accessories PolyPro III Deluxe Travel Trailer Cover - Model 3 22- 24' RVs Grey #052963733631. This cover has a triple layer top that is great with all weather and it is a…

view full answer...

Answer 12

I definitely recommend a wireless brake controller for your 2014 Nissan Murano, the Curt Echo Mobile Trailer Brake Controller part #C51180 in particular. The Curt Echo is the easiest to install option we have for you and it will be very simple to…

view full answer...

Comparing the Redarc Tow-Pro Elite vs Tekonsha Prodigy P3 Brake Controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching