bing tracking image
Q & A Icon

Installing the Ground from the RV Tail Light RVSTB60 on a Wood Trailer  

Question:

Yes I bought a part from you and it is a brake,tail,and turn signal unit for my camper, the one I had only had two wires and this unit RVSTB60 has three wires and so my questin is where do I hook up the white ground wire for everything is wood on the back of the camper,?

0

Expert Reply:

If you do not already have a ground wire running to the tail light for installing the RV Tail Light # RVSTB60 that you referenced, then that is what you will need to do.

You can take 16 Gauge Wire # 16-1-1 and connect it to the White wire on the tail light using Deka Heat Shrink Butt Connector # DW05744-5. You will then need to route the wire to a clean, bare-metal surface and the ground it using a Deka Ring Terminal # DW05744-5. This ring terminal has a 1/4" inner diameter so you will just need a compatible self tapping screw like part # FA1131822.

You can route other grounds to this wire as well.

expert reply by:
0
Jon G

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>