Parts Needed to Flat Tow a 2009 Chevrolet Silverado 1500 LTZ

Question

Question:

Need feedback and product info. I want to flat 4 tow a 2009 Silverado 1500 4WD LTZ behind a 2017 Class C Jayco Greyhawk 29ME on a Ford E-450 chassis. Do your homework to figure tow bar, braking and wiring required. Thanks

asked by: David S

1

Helpful Expert Reply:

Hopefully my dog doesn't eat it.

In addition to the tow bar, supplemental braking, and wiring you also need a base plate kit and likely a high-low adapter to tow your 2009 Chevy Silverado.

Since you're towing a full size truck you want a tow bar with a higher capacity so I recommend the Roadmaster Blackhawk, part # RM-422. It's rated up to 10,000 pounds. For the safety cables used the coiled # RM-643.

The MX Base Plate Kit, part # 3154-3, pairs well with the BlackHawk. The MX kit doesn't require the crossbar and uses pins to connect. This makes the connection easier and quicker when hooking up.

For the wiring kit I recommend the diode kit, part # RM-15267. This powers the vehicle's tail lights by connecting to the Jayco's and includes the cord to go between the two. The kit provides a 6-way connector at the front of the truck.

For a supplemental braking system the SMI Stay-IN-Play DUO, part # SM99251, is a favorite around here because of how reliable it is and it's easier to install than many other permanently installed systems. Once it's installed there isn't any further setup needed. With the DUO, if the brake lights on your truck don't illuminate when its ignition is off or it's in the "tow" position you'll also need a stoplight switch. If your Chevy has adjustable pedals then the correct switch is part # RM-751220. If the pedals aren't adjustable you need part # RM-751421 instead.

Finally, you'll likely need a high-low adapter. I've attached an article to help you determine the correct rise or drop your setup requires. I've also linked our selection of adapters for you to look at once you know what you need.

In addition to my recommendations I've linked some articles on flat towing that you may find helpful.

expert reply by: Charles S

1

Answer 1

The first thing you need to flat tow your 2011 GMC Sierra 1500 is a base plate kit like the Roadmaster part #3154-3 which is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and…

view full answer...

Answer 2

In order to flat tow a 2012 Chevrolet Silverado you will need base plates, a tow bar, flat-tow wiring harness, and safety cables. In some states a supplemental braking system is also needed though this is not a required component. I have attached…

view full answer...

Answer 3

You are correct that the 2011 GMC Yukon 4x4 with single speed transfer case cannot be flat towed as is. I've attached a photo of the pages from the owners manual to assist. It is logical to think because the 2 speed transfer case models can…

view full answer...

Answer 4

The best base plate kit for your 2009 Sierra 1500 is going to be the Roadmaster Direct-Connect Base Plate Kit item #3154-3. This kit is custom fit and built specifically for the Sierra 1500's. The removable arms will keep your front end as…

view full answer...

Answer 5

In order to flat tow your 2013 Chevy 1500, you'll need a few different parts: tow bar, base plates, safety cables, lights and a supplemental braking system (which you already have). I've broken down each individual part you'll need below.…

view full answer...

Answer 6

To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 7

With the Roadmaster Sterling, part #RM-576, I recommend the MX kit, part #3154-3, for a base plate kit that fits your 2010 Chevrolet Silverado. The safety cables of the Sterling won't fit with these but you can attach the cables somewhere else on…

view full answer...

Answer 8

To flat tow your vehicle, you'll need a tow bar, base plates, safety cables, a wiring solution so that the truck taillights work in conjunction with those of the tow vehicle, a supplemental braking system and possibly a high/low adapter. For Blue…

view full answer...

Answer 9

I looked in the owners manual for your 2013 Chevrolet Suburban and it can be flat towed or dolly towed, depending on if it's 2 or 4 wheel drive, and if it has a single or two speed transfer case. If you suburban is 2wd or has a single speed…

view full answer...

Answer 10

I used a search engine to look up the online owner's manual for a 2009 Chevy Silverado 1500 with 4WD and it states on page 4-47, after shifting the transfer case in neutral and releasing the parking brake to "Turn the ignition to LOCK/OFF…

view full answer...

Answer 11

To flat tow your 2013 Chevy Silverado you'll need a tow bar, base plate, braking system, tow bar wiring kit, and safety cables. I have the following recommendations for you listed below: Tow Bar: etrailer XHD Non-Binding Tow Bar for Roadmaster…

view full answer...

Answer 12

I do have a list of parts needed to flat-tow a 2009 GMC Sierra 1500 but guidelines will be outlined in the owner's manual so I encourage you to look here for yourself. Generally speaking, 4WD models are good to go as is but 2WD models require the…

view full answer...