Does the C59496 Trailer Wiring Harness fit 2006 Volvo XC70

Question

Question:

Can the C59496 be installed on 2006 volvo xc70 awd with battery in spare tire well

asked by: Charles P

0

Expert Reply:

The # C59496 is a confirmed fit for your 2006 Volvo SC70. The # C59496 provides the wire needed to connect the converter to the vehicle's positive battery terminal, the fuse holder, the fuse, the installation hardware and the circuit tester to help determine which taillight circuit carries which taillight function.

expert reply by: Robert G

0

Answer 1

What you described is a classic ground issue. The problem is that the added amperage draw of the head/running lights being on for your vehicle makes the trailer taillights a bit weaker. What you would want to is run the grounds of the light…

view full answer...

Answer 2

Assuming the lights and wiring on your older trailer are in good condition you will not have any issues connecting with and powering its standard incandescent lights with a tow vehicle that is equipped with LED lights. The difference in light…

view full answer...

Answer 3

The Wiring Harness, #C59496, is the correct wiring harness for your 2006 Volvo XC70 wagon. This harness was designed not to interfere with any bulb warnings or sensors on your vehicle. This harness uses power from the vehicle battery to power the…

view full answer...

Answer 4

According to Curt the hitch part #C12318 that you referenced is a fit for all models of the 2004 Volvo S60 so it will fit yours well regardless of what the VIN shows.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Does the C59496 Trailer Wiring Harness fit 2006 Volvo XC70

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching