What is Length of Replacement Handle Rod # SJ-100-HD

Question

Question:

What is the length of this bar??

asked by: Ray

0

Expert Reply:

The length of the Replacement Handle Rod # SJ-100-HD is 11-3/4 inches.

expert reply by: Jameson C

0

Answer 1

Most likely it would work fine. Most of these are 1/2 inch in diameter like the part #SJ-100-HD that you referenced. If yours needs a 1/2 inch diameter rod this would work well.

view full answer...

Answer 2

The stabilizer jack I recommend for your enclosed cargo trailer is the Drop Leg Stabilizer Jack #TJ01RT because it will work well to stabilize your trailer for loading and unloading and is easy to engage when needed. The #TJ01RT drop leg stabilizer…

view full answer...

Answer 3

Typically you mount stabilizer jacks like Item #TJ01RT under the corners of your camper. These jacks have a 650-lb capacity, are sold individually, and are designed to keep your camper level and steady. They have a bolt-on or weld-on installation and…

view full answer...

Answer 4

The diameter of the Replacement Handle Rod #SJ-100-HD you referenced is 1/2 inch.

view full answer...

Answer 5

It should fit perfectly, but because the Atwood jack has been discontinued for awhile and I can't confirm it for myself I'd recommend simply measuring the diameter of the hole in the assembly where the jack handle installs. If that hole…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

What is Length of Replacement Handle Rod # SJ-100-HD

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching