Master Lock Padlock to Work With Blaylock EZ Lock Trailer Coupler

Question

Question:

Will the Master Lock Hidden Shackle Part # 970DPF work this ball lock?

asked by: Marc

0

Expert Reply:

The Master Lock 970DPF will not work with the Blaylock EZ Lock Trailer Coupler # BLTL-33; instead you would want to use the Master Lock Padlock # ML40D.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I was unable to find a combination system that would work to lock both the coupler on your trailer and also the hitch receiver on your 2013 Dodge Ram 2500 with a 2-1/2 receiver. For a simple system to secure your coupler I recommend the Blaylock EZ…

view full answer...

Answer 2

I want to start off by saying that any trailer lock that you purchase will never be able to fully secure your trailer from a thief. If they are determined enough to bring equipment with them to remove a lock then given enough time they will be able…

view full answer...

Answer 3

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...