Recommended Trailer Hitch Receiver for 2004 Toyota Tacoma Along With Wiring and Ball Mount

Question

Question:

Trailer Hitch for 2004 Toyota Tacoma. Does it come with bolts? What else do I need?

asked by: Harry

0

Expert Reply:

For your 2004 Toyota Tacoma, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13013. This trailer hitch is rated for 500 lbs tongue weight or 600 lbs when used with weight distribution system. It is a custom fit bolt on installation and comes with all the hardware needed to install. It has a black powder coat finish over a protective base coat for excellent rust prevention. It is a sturdy square tube design that is 100% made in the USA.

For your trailer wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55379. This custom-fit T-connector plugs into your Toyota Tacoma's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You may also want the mounting bracket # 18144 and # C57202 to protect your wiring and secure it to your hitch.

For a ball mount, I recommend the Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 4" Drop or Rise, # AM3462. This will allow you the flexibility to transport numerous trailers with your Tacoma without issue. You may also want the Andersen Trailer Hitch Lock and Adjustment Pin Lock Set # AM3493 to secure your ball mount.

expert reply by: Jason S

0

Answer 1

The cover we offer that will fit your 16 foot long trailer the best and offer the best protection is the Adco SFS AquaShed Cover #290-46004 which fits trailers that are between 14 and 16 feet in length. It also provides the best protection…

view full answer...

Answer 2

You can replace it with the same fireplace which would be the Greystone 26" Electric Fireplace with Crystals - Recessed Mount - Black Item #324-000069. This unit will fit right into your cutout with the same exact mounting holes.

view full answer...

Answer 3

There's no reason you couldn't use a 7-way junction box like the part #38656 to install a 4-way. It would be just a matter of wiring up only 4 posts of the junction box on the input and output side of the box instead of 4. With only…

view full answer...

Answer 4

A vehicle's roof weight capacity may not always appear in the owner's manual, although you certainly would expect to easily find this information there. Sometimes you will need to inquire at the local dealership to find this out. I…

view full answer...

Answer 5

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 secures to your king pin with bolts so that the only pivot point is the gooseneck ball, on which the aluminum block adapter will then rotate. Please see the linked photo.

view full answer...

Answer 6

We offer replacement keys for Thule products and we can help you with new keys for your rooftop cargo box. Take a look at the face of the lock cores on your Thule box. There should be a reference stamped into the lock face that has a letter like N…

view full answer...

Answer 7

A 205/75R14 tire is going to fit on a 14 inch wheel though to get the correct one you will need to know the bolt pattern of your current wheels; I've attached a help article for you which explains exactly how to determine what bolt pattern you…

view full answer...

Answer 8

There isn't a kit available for what you are looking for, but you can still piece everything together. For grommets to use with the #ST45RB you would want the part #A45GB and then for a pigtail you would want the part #A45PB. Often times, people…

view full answer...

Answer 9

We do carry a Y-style bow stop that will fit on a 2 inch wide mounting bracket, it is part #YR4Y22-3. The base of the Y-style Bow Guard, #YR4Y22-3 measures 2 inches wide and accepts a 3/8 inch diameter roller shaft. I have attached a photo showing…

view full answer...

Answer 10

You will need an additional change key, part #Y8007835. What you will need to do is unlock your q towers and then insert the change key and the core will release from the tower and allow you to slide it out. From there you will be able to insert your…

view full answer...

Answer 11

For a 5 bike rack that provides the maximum in stability for the 2 inch hitch on your Toyota Sequoia, the Thule Apex 5 Bike Carrier, part #TH9026XT, that you referenced would work very well. I attached installation instructions for this product for…

view full answer...

Answer 12

I am not familiar with the ARB T bolt track. Based on my research it appears you would need the mounting bracket #RR31103 for the ARB trays but I can't find anything about the quick release compatibility. The Rhino-Rack Batwing Compact Awning -…

view full answer...