Weight Distribution Recommendation for a 2007 Chevy TrailBlazer Towing a Jayco Travel Trailer

Question

Question:

Im purchasing a new Jayco X18D travel trailer with the following maximum specs: TW = 470 GVWR = 4400 Unloaded VW = 3555 dual axle I will be towing it with a 2007 2.4L six Trailblazer with factory installed trailer package with the following specs on the hitch sticker: Max TW: 400 912 with Weight Dist Sys WDS GVW: 4000 7600 w/WDS What would you recommend for a WDS? As most folks Im tryiing to save some $$ but want the towing capacity. Thanks! Im planning on putting in a friction anti-sway system Have a great day!

asked by: Peter S

0

Expert Reply:

For your new Jayco trailer and Chevy Trailblazer, I recommend the Fastway E2 Round Bar Weight Distribution Kit, # FA94-00-0600. It is a little more economical, includes sway control, and it comes with the adjustable shank. You would just need a properly sized ball like # 19286 (2-5/16 inch diameter) or # A-90 (2 inch diameter).

This system has a tongue weight capacity range of 200 to 600 pounds so the 470 pounds max on the trailer will fit nicely in the middle of that range. I have included a link to our FAQ article on weight distribution and sway control for you to view.

expert reply by: Michael H

0

Answer 1

The solution you came up with is the best solution to allow you the needed tailgate clearance. The Equal-i-zer shank part #EQ90-02-4600 will give you the clearance you need and while it is longer the added length would not significantly change the…

view full answer...

Answer 2

What you need for your boat trailer is a pole tongue adapter like part #RP58393. This product is designed to work on trailers with straight tongues just like your boat trailer. I attached a picture of what it looks like installed. The best way to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

I think you'll need to go up a level in weight rating for your 5,000 lb GVWR Airstream travel trailer. The reason being the Reese Pro Round Bar Weight Distribution #RE34FR is for loaded tongue weights between 200 lbs and 600 lbs. I assume the 520…

view full answer...

Weight Distribution Recommendation for a 2007 Chevy TrailBlazer Towing a Jayco Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching