Length of Extensions of Advantage SportsRack Hitch Extender

Question

Question:

Can you tell me the length of extensions i can get from this?

asked by: Bill P

0

Expert Reply:

The Advantage SportsRack Hitch Extender # HE6000 has 4 different holes, 2 for the vehicle connection and 2 for the accessory connection. The different combinations of attachment can extend your hitch accessory 5-3/4", 8-1/4" or 8-1/2", or 11" out from the hitch.

I've attached videos of this extender for you to see how it works.

expert reply by: Charles S

0

Answer 1

The threaded portion is 1" long on the Replacement M8 x 16 mm Rectangular Head T-Bolt for Rhino-Rack Accessories - Qty 1 item #RR89HB.

view full answer...

Answer 2

Yes, you are correct. The Ark Articulating Off-Road Coupler for 2" Receivers item #AR44FR fits a standard 2" receiver ball. The kit comes with one you can use, but if you already have one hooked up to your pick-up truck and side by side…

view full answer...

Answer 3

The Advantage SportsRack Hitch Extender for 2" Trailer Hitches #HE6000 is a hitch extender for 2 inch hitch receivers. The larger tube is about 5-1/2 inches deep. It offers four extensions of 5-3/4", 8-1/4" or 8-1/2", or 11"…

view full answer...

Answer 4

It is perfectly legal to use a hitch extender; however, in some places there are laws about the total length a trailer can be. This almost certainly will not affect your ability to tow a nuCamp TAB but it is always a good idea to verify your local…

view full answer...

Answer 5

We have an extender for a 2 inch hitch that meets the shank length you were looking for. The Tow Ready #HE18 has a shank that measures 13-1/2 inches overall, 11 inches in length from the hitch pin hole to the beginning of the receiver as shown in the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...