Weight of the Brophy Camper Scissor Steps # AS25

Question

Question:

Since I will need to take this on and off, what is the overall weight of the Brophy Camper Scissor Steps assembly?

asked by: Ivan K

0

Expert Reply:

The Brophy Camper Scissor Steps # AS25 weigh 33 lbs. They can be folded up, as shown in the attached photo, to make handling them easier since you will be taking them on and off.

I've also added a link to a video review of this product for you to take a look at.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 2

When you have the Brophy Camper Scissor Steps #AS25 installed at a 45 inch height they will stick out from the vehicle right at 46 inches. I attached a review video for these for you to check out as well.

view full answer...

Answer 3

The 4 step Brophy Camper Scissor Steps, #AS24 is recommended for an entry height of 31" - 40" while the 5 step model, #AS25 crosses over for an entry height of 40" - 48". My recommendation is to go with the 5 step model that…

view full answer...

Answer 4

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 5

Aluminum Scissor Steps #AS25 measure up to 48 inches tall and would be the best option for you. They have a 250 pound capacity. The other option is #AS05 which also can extend as much as 48 inches. To add a hand rail, if needed, use #AHR5.

view full answer...

Answer 6

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 12

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Weight of the Brophy Camper Scissor Steps # AS25

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching