TorkLift Front Frame-Mounted Camper Tie-Downs Review Video

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

Thanks for the photos and like you said, they are the Atwood jacks 86065, which are discontinued jacks. What that means is the best option we can offer are new, manual camper jacks, the Brophy Cable Camper Jacks. Based on my research, your 2014 Lance…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

We can get your 2019 Ford F-450 set up with camper tie-downs for a truck camper, and what you will need is the following, so long as you A) have the factory trailer hitch and B) do NOT have factory flip-out steps that are mounted under the truck bed.…

While you are correct that the hitch you have on your 2015 GMC Sierra 1500 is one of the factors for finding the correct camper tie-downs, but most work with both factory hitches and non-torklift aftermarket hitches. You only need more specific…

We can definitely get you setup with a backup camera for your trailer. There will be some things we have to work around to get this setup properly. First, the Furrion cameras will only work with Furrion monitors, so you will not be able to use the…

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

The HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 have a minimum reach of 16-1/2". This means your tie-downs need to be at least 16-1/2" away from the attachment points on your camper. The best way to determine fitment would…

The HappiJac Rear Tie-Down - Qty 1 item #LC182866 will fit your 2017 Ford F-250's stock bumper but you will have to drill a hole in it. I have linked a review video below. A way better option to secure an in bed camper is to use the TorkLift…

Sounds like you are looking for the part #C49360. This is a 2 inch hitch accessory tube that measures 36 inches long and has the standard 5/8 inch pin hole. I attached a review video for this product for you to check out as well.

From the longer end of the Curt Solid Steel 2" Hitch Bar #D29 to the center of the hitch pin hole is 7-1/2" and from the shorter end to the center of the hitch pin hole is 2-1/2". I have attached a photo for you to check out as well.

Great question! I've attached part of the installation instructions that show how to install the rear part of the HappiJac Custom Tie-Downs #LC350763-182971 on the step bumper for your 2016 GMC Sierra 1500.