Review of TorkLift RV and Camper Steps - 4 Step Scissor Steps - TLA7804 Video

Sounds like you'd want to go with a removable scissor setup like the Brophy Camper Steps part #AS24 which will need to be taken off it's mounting bracket between uses. This will give you total access to your trailer hitch when needed.

Both the Brophy #AS24 and the TorkLift #TLA7804 are easily removed when not in use- and it's actually recommended that you do so. Additionally, they both weigh in around 26-lbs total, so they're easy to move on and off; so they'd both be…

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

The 7-way should be operational. Try using a circuit tester like part #PTW2993 as each lighting function is activated. If the 7-way is not functioning, check the fuse box under the hood and make sure the relays that activate the tow package and the…

If your 2017 Ford Transit T250 came with the factory tow package then you simply need the Hopkins #HM40975 to add both a 7-Way and a 4-Way connector. This will plug into the US Car Connector at the rear of your Transit. We also have kits that can be…

Factory wiring could be any color since there is no one standard that all manufacturers follow. You will need to test the wires by function using a circuit tester such as #PTW2992 if you do not already have one. I have included a picture that shows a…

I took a look at the online version of the owner's manual for your 2018 Ford F-150 and was able to locate the wiring color code for the factory 7-Way trailer harness on the truck. The wires leading up to the factory plug are as follows: Yellow -…

It looks like Palomino travel trailers and truck bed campers are set up to be compatible with Furrion Vision S Wireless backup camera systems like the #FOS43TASF, which comes with a 4.3" full color LCD monitor. If you wanted to go with a larger…

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

The All Terrain Landing Gear for TorkLift GlowStep Scissor Steps #TLA8000 could be made to fit an RV like yours but scissor steps aren't typically found on RVs. If you wanted to remove your current setup and install a similar setup you certainly…