Recommendations for Flat Towing a 1956 Cadilllac Coupe Deville

Question

Question:

i have a retro 1987 Fleetwood Mallard motor home it is fitted on a chev chassis with a 454 Chev Motor has done only 30,000 miles and i wishing to purchase a C19745 os similar i see its towing capacity is 5000 pounds and i see that people tow there chev 1500 and larger would this be fine to do but im not sure of the mounting position i suspect im going to have to remove the front bar dont have a photo on this computor so just google 1956 Cadillac Coupe Deville

asked by: Robert G

0

Expert Reply:

From what I can find online, it appears that your 1956 Cadillac Coupe Deville is between 4500 and 5100 lbs. If you are not on the heavy end of the spectrum then, the Curt Tow Bar with Adjustable-Width Arms - Car Mount - 2" Ball - 5,000 lbs # C19745 would work, but I recommend taking your car to a scale to confirm. For your safety cables, I recommend # RM-645.

We don't have confirmed fit parts for your flat tow system because this is so unusual a flat tow vehicle, however, I have some suggestions for you of the products I would use.

For wiring, I suggest the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267.
For your supplemental braking system, I recommend the Blue Ox Patriot Portable Braking System - Proportional # BLU37TR. You will need a 12V outlet like # RM-9332 for this system.

To tow your Cadillac level, I recommend the adjustable ball mount like the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs # CAB-UM along with 2 inch ball # 63845.

If you have further questions, let me know.

expert reply by: Jason S

0

Answer 1

The cushion inside of the Convert-A-Ball cushioned ball mount #AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it…

view full answer...

Answer 2

There is not an exact set minimum tongue weight for the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" part #C45949-22516 however it is not going to be very effective on a light weight trailer. We have asked Curt before about…

view full answer...

Answer 3

Yes, you can use either piece of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, #CAB-UM, in the rise of drop position to find the configuration that is best for you. I have included a link to a video review of this ball mount for you.

view full answer...

Answer 4

It is not recommended to deviate from the original manufacturer components because the combination has not been tested together for fit, compatibility and safety. With that being said, I went to the warehouse and measured the holes of the MaxxTow…

view full answer...

Answer 5

The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM is indeed an excellent option that will help improve the overall towing experience by decreasing the felt road shock in the tow vehicle. The Convert-A-Ball in particular as you…

view full answer...

Answer 6

I personally spoke to Curt who informed me their Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 should not be used with the Convert-A-Ball Ball Mounts including #CAB-UM. For the best experience I recommend using a ball mount with the…

view full answer...

Answer 7

Tow bars are used behind motorhomes or trucks to tow a vehicle. The Roadmaster 10 inch High - Low Hitch Adapter, part number RM-048-10, is not designed to have tongue weight applied to it like when towing a boat trailer, utility trailer or camper.…

view full answer...

Answer 8

As long as your 2011 GMC Terrain has the standard size wheel and tire combination on it, the Convert-A-Ball Ball Mount, item #AMSC2, would be the most versatile ball mount that is not adjustable. We do carry many different styles of adjustable ball…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Recommendations for Flat Towing a 1956 Cadilllac Coupe Deville

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching