Recommended 7-Way to 6-Way Connection With Diodes for Towed Vehicle Connection

Question

Question:

I need a 7 pin female plug and wire to a 6 pin Female and 4 diodes. I seek it with more than I need. Do you have something like that?

asked by: Pat Z

0

Expert Reply:

We have exactly what you are looking for. It is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This extension has a 7-way plug to a 6-way plug along with the 6-way connector and the 4 diode s with wiring. This is a very user friendly way to wire your towed vehicle to give you a clean connection and also allow you to use the factory wiring while protecting it from overload.

expert reply by: Jason S

0

Answer 1

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 2

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

view full answer...

Answer 3

For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This…

view full answer...

Answer 4

Ok, I believe I know what you are saying because the instructions from the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 for your 2019 Jeep Grand Cherokee make it seem like you may need to switch wires to get pins to match up, but…

view full answer...

Answer 5

To add a tow bar wiring harness to your 2018 Jeep JL Wrangler Unlimited I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267, which is a fit for your JL. I've added links to video reviews of this part for you to check…

view full answer...

Answer 6

The LED lights on your 2018 Jeep Wrangler JL use the same wiring harnesses available for incanescent lights. I've linked our selection for you. I like to recommend the diode kit, part #RM-15267, because it installs a 6-way at the front of the…

view full answer...

Answer 7

I have exactly what you need to operate the lights on your 2019 Jeep Wrangler using the signals from your 2005 Fleetwood Bounder Motorhome. For this, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part #RM-15267 which comes…

view full answer...

Answer 8

If your brake and turn signal lights are not working on your tow car, then start by checking the fuses in your RV to see if everything checks out. You will also want to check your connectors to see if there is any type of corrosion which may be…

view full answer...

Answer 9

For your 2016 Jeep Cherokee Limited the correct base plate kit is the part #BX1138 which is a confirmed fit. The install is pretty involved but it's not overly difficult. If you have the time, space, and tools for the job it would be fine for…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

view full answer...