What is the Best Flat-Tow Wiring Harness for a 2019 Jeep Wrangler
Question:
Recommended flat-tow harness for a 2019 Wrangler using a 2005 bounder
asked by: RickyBobby
Expert Reply:
I have exactly what you need to operate the lights on your 2019 Jeep Wrangler using the signals from your 2005 Fleetwood Bounder Motorhome. For this, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which comes with everything you need including diodes, wire loom, and trailer connectors for both the vehicle/motorhome.
According to my research, your 2005 Fleetwood Bounder should have came with a factory 7-way so this part of the install process will be plug and play. In regards to the Wrangler, you will need to run a signal wire from the vehicle's right turn/stop, left turn/stop, and running light circuits up to the 6-way trailer connector on the front bumper with the respective diodes placed on each wire.
If you need help with the install process then I have attached a sample install video for you on a similar 2014 model but please keep in mind the wire colors will more than likely be different. I have also attached the wiring in print form for you as well. Please let me know if you have any questions.
Product Page this Question was Asked From
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: etrailer Invisible Base Plate Kit Installation - 2021 Jeep Wrangler
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Video: Roadmaster Tow Bar Wiring - Splices into Vehicle Wiring - RM-15267 Review
- Q&A: Recommended Wiring Harness to Flat Tow a 2018 Jeep Wrangler JL LED Lights
- Shop: Hopkins Tow Doctor Trailer End Test Unit
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Video: Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2014 Jeep Wrangler
- Video: Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2017 Jeep Wrangler Unlimited
- Video: Roadmaster Direct-Connect Base Plate Kit Installation - 2019 Jeep Wrangler
- Video: Roadmaster Universal Diode Wiring Kit Review RM-15267
- Q&A: Flat Tow Wiring for 2019 Jeep Wrangler
- Q&A: Recommended Wiring To Flat Tow 2020 Jeep Wrangler Behind A Motorhome
- Search Results: trailer connector tester
- Shop: Base Plate for Tow Bar
- Shop: Saris SuperClamp EX Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount - Tilting
- Shop: Roadmaster Smart Diodes for Variable Voltage LED Tail Lights - Qty 2
- Shop: Roadmaster Universal Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights
- Article: Trailer Wiring Diagrams
- Video: Saris Freedom Hitch Bike Rack Review - 2013 Ford Edge
- Q&A: Trailer Brake Lights Do Not Work when Headlights Are On
- Q&A: Can the Input on the RoadMaster Diodes be Reversed
- Q&A: Roadmaster Diode 7-Wire to 6-Wire # RM-15267 Wiring Diagram for Motorhome to 2016 Ford Focus
- Q&A: Troubleshooting Tail Lights not Working With Roadmaster Diode Flexo-Coil Wiring Kit
- Shop: Vehicle Tow Bar Brake System
- Search Results: base plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: tow bar
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Tow Bar Wiring
