Replacement Anode and Water Element for SW6DE Water Heater

Question

Question:

My heater is making a noise while heating. Im told the electric element is corroded and thats making the noise. I know the anode is badly corroded. If Im on the tight track can you provide me with the element and anode as well as element removal tool if necessary.

asked by: Jeff H

0

Expert Reply:

The replacement anode for your SW6DE water heater is part # CAM11563 while the replacement water heater element is part # CAM02143. The tool you need to remove the element is part # CAM09883.

Attached is a video showing how to remove your water element if you plan on doing this yourself.

expert reply by: Jon G

0

Answer 1

Your Suburban SW6DE takes a 3/4 inch anode rod like the part #CAM11563 which would work well.

view full answer...

Answer 2

Yes, the Camco RV Water Heater Anode Rod, part #CAM11563, is in fact the correct size tap for your SW6DE water heater. It has a 3/4" NPT and 12 threads per inch.

view full answer...

Answer 3

The Camco Water Heater Element part #CAM02143 and Camco RV Water Heater Anode Rod part #CAM11563 will both work on a Suburban SW6DE Water Heater.

view full answer...

Answer 4

The Furrion tankless water heater part #FR68SR would be a great option for you. It's tankless like you are wanting which is a better design than a tank kit and it also has a door kit that comes with it that measures 18 by 18 inch so it would…

view full answer...

Answer 5

According to Dometic, the company that purchased Atwood, the MPD 93755 is an instruction booklet. To get particulars about where the element is located, I'd need the model number of the heater itself. The number should be printed or stamped…

view full answer...

Answer 6

Usually the access point for installing a replacement bulb like #VA0415-00 in an RV range hood is found behind a removable plastic or glass lens that faces downward toward the cooking surface. These often slide out of a channel or are snapped into…

view full answer...

Answer 7

We looked through the manual for the Suburban SW6DE water heaters and found that the Suburban replacement is similar but shorter than the Camco model #CAM02143. It looks like the original one used in that water heater was discontinued and replaced…

view full answer...

Answer 8

For your Suburban SW6DE, you will want the Camco Water Heater Element #CAM02143 and the anode rod #CAM11563. This water heater will use a combination of electric and gas to heat your water. The electric ignition and element will determine the heating…

view full answer...

Answer 9

I was looking through the manual for the Suburban SW6DE water heaters and found that the Suburban replacement is similar but shorter than the Camco model #CAM02143. It looks like the original one used in that water heater was discontinued and…

view full answer...

Answer 10

The correct anode you need is the part #CAM11563 that you referenced. This #CAM11563 fits as a replacement for the Suburban anodes like what you have so it would be exactly what you need.

view full answer...

Answer 11

The Dometic 320 Full-Timer RV Toilet #DOM87FR doesn't have a replacement flush ball so instead you'll want to use the Dometic 510 Full-Timer RV Toilet #DOM29FR which is slightly smaller than the 320 but has the same materials and basic specs…

view full answer...

Answer 12

The correct Camco anode rod for your Suburban SW12DE water heater is part #CAM11563. You can confirm beforehand simply by comparing dimensions. This aluminum rod measures 3/4-inch diameter and 9-1/2-inches long.

view full answer...