Replacement Roof Vent Cover and Cargo Door Hasps for Haulmark Trailer

Question

Question:

I am looking for a replacement roof vent cover and replacement cargo door lock hasps for a haulmark trailer.Build date 2/09,model # TSV6X12062, VIN # XXXXXXX129P072672

asked by: Fran

0

Expert Reply:

For your 2009 Haulmark trailer, I recommend the Replacement Hasp for Polar Cam-Action Latch Kits - 1" Wide - Zinc-Plated Steel # 158-101 with bolt hole measurements of 4-1/4 inches on center or the Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel # PLR258-101 with a bolt hole measurement of 3-3/4 inches on center.

If you want the entire assembly, I recommend the Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers - Zinc-Plated Steel # 383200.

The replacement vent cover will depend on what style of hinge your cover has. I've attached a photo to assist and have linked the page to your options.

expert reply by: Jason S

0

Answer 1

The best thing to do to determine if this is the correct hasp for your 2000 Haulmark is to measure. I have linked an image with the measurements of the Polar Hasp #158-101 to this page for your convenience. The center on center mounting holes are…

view full answer...

Answer 2

Replacement Hasp #PLR258-101 can be used as a stand alone item but it is a replacement for the hasp that comes with Cam-Action Lockable Door Latch Kit #PLR258-002. It does not sound like what you are looking for though. To determine if we have what…

view full answer...

Answer 3

If your breakaway battery is dead, your brakes should operate while connected to your vehicle's 7-way trailer connector. If your brakes are not operating, then it sounds like you might have a short in the brake wiring of the trailer. Battery…

view full answer...

Answer 4

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

view full answer...

Answer 10

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

view full answer...

Answer 11

The best option for a Class C motorhome windsheild cover is going to be the Adco Deluxe Cover part #290-2507 which is designed for Class C motorhomes just like yours. I attached a review video for this cover for you to check out as well.

view full answer...

Answer 12

The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…

view full answer...