Review of Reese Pintle Hitch - Pintle Mounting Plate - RP38186 Video

I had the bolt holes on the Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches #RP38186 measured, and they are actually 5/8". That being said, I suggest going with the Curt Pintle Hook #C48215 to attach to it. This does include 1/2…

The BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch #58388 that you are interested has a 5/8 inch diameter hitch pin hole which is the standard size for 3 inch hitches. Most likely this is what you have as a 3/4 inch diameter hitch pin…

I recommend installing the OptiMate Solar Duo Roof Mount Solar Charging System with Controller #MA49JR which is rated for 10 Watts and 12V batteries from 2 to 240 amp-hours. This provides a trickle charge and comes with a controller so you can be…

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

Yes, we have pintle hook mounts for 2-1/2-inch hitches that are similar to the 3-inch Reese Super Titan #RP38186. All of them can be seen on the page I linked for you. Pintles generally do not have a class rating, just a weight rating. The highest…

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…

The standard size for Lunette rings is 3 inch like what you have. While I am not totally certain what hook you have it's likely you did buy the correct size. Due to the looser connections of Pintle/Lunette setups some noise is to be expected.…

For a massive pintle hook that mounts to a plate we have the part #337PH50 which has 6 mounting holes or the part #337PH55 which has 10 mounting holes. These towing behemoths come from Buyers Products and have a max tongue weight of 20,000 lbs and…

The highest weight rated pintle hitch mount I have that will fit in a 2 inch hitch receiver is the Convert-A-Ball, part #PH2. rated for up to 16,000 pounds. Curt pintle hitch #C48231 does not fit a 2 inch receiver.

The correct hardware to use with the Buyers Products 3 Position Pintle Hook Mount part #337PM25812 will largely depend on what accessory will be attached to it. For example, the Buyers Products 10 Ton Combination Hitch with Mounting Kit part…