Why is Weight Capacity of Trailer Hitch Receiver Confirmed to Fit Greater Than Vehicle Tow Rating

Question

Question:

I purchased a class III trailer hitch model C13093 which is custom built to fit my 2016 Chrysler 300. The hitch is rated for 3500 lb load. However I now learn my vehicle is only rated for 1000 lb capacity. Was planning to pull a cargo trailer load of about 2000 lbs. Dont know if I dare use it. Please advise.

asked by: Marwood R

0

Expert Reply:

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13093 is a confirmed fit for your 2016 Chrysler 300 and is also a fit for a few other models like the Dodge Charger and Dodge Challengers of certain model years. The towing capacity of your vehicle is 1000 lbs as you mentioned, and it is not uncommon for trailer hitch receivers to be rated much higher than the vehicles they are made to fit. This is the case of your vehicle and hitch receiver but the hitch manufacturers test them apart from the vehicle for strength.

Although many people will tow a load beyond the manufacturers listed capacities, I can't recommend you do so as it may damage your vehicle and void your warranty.

expert reply by: Jason S

0

Answer 1

The Curt Class III hitch part #C13093 measures 10-1/2 inches from the TOP of the hitch opening down to the ground. We know this since we installed this hitch on a 2012 Chrysler 300C. So since this is a 2 inch hitch and the lip of the hitch opening…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...