Replacement Installation Hardware for Curt Trailer Hitch Receiver # C13149

Question

Question:

I have a Curt C13149. my mechanic took it off to install a muffler and lost the bolts and washers. Do you know what kind/size/strength they are? It on a 2011 toyo. rav4

asked by: Dan C

0

Expert Reply:

We have exactly what you need to replace the hardware for your Curt # C13149 Trailer Hitch Receiver. For the complete hardware kit, you will just need the part # RHK. Once on the product page, you will simply type the model number (C13149) in the box provided along with selecting Curt from the manufacturer drop-down menu.

This will ensure that you receive the exact strength and hardware type that is needed for installation and safe use.

expert reply by: Chris R

0

Answer 1

The Draw-Tite #36408 Class II hitch you referenced uses 4 M12x1.75 bolts to attach to the nuts welded into the frame. If they are corroded, and spraying them with a spray lubricant like PB Blaster and using a wire brush like one on a battery…

view full answer...

Answer 2

Most Vehicles and hitches have their own specific hardware to insure proper fit and towing capacity. Our #C13149 hitch includes a hardware kit and installation guide. I attached a video on the installation for your convenience. The hardware specs…

view full answer...

Answer 3

We sell replacement install hardware for all of the hitches we offer with the part #RHK. You'd just need to enter the hitch's part number on the product page and we'll ship you out the correct hardware.

view full answer...

Answer 4

Thank you for your purchase from etrailer of the Curt Trailer Hitch Receiver #C13149 for your 2014 Toyota RAV4. The bolts aren't too big, you just need to clean the weld nuts. What you'll need to do is use a spray lubricant such as…

view full answer...

Answer 5

The hardware included with the Curt Trailer Hitch Receiver #C13149 are M12-1.25 x 35mm bolts and 1/2 inch conical toothed washers. I couldn't find an order from us. If you ordered the hitch from us and it didn't include the hardware let me…

view full answer...

Answer 6

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...